ASTM A182F316L High Pressure Socket weld Flange

Class 150 WN flange is the lowest pressure flange in all the flanges,langes also have many pressures:CL300, CL600, CL900, CL1500, CL2500.ASTM A105 is the matal standard for forged flanges and fittings.

All flanges are round disks with holes for bolts around the rim, but the commonalities end there. a projecting flat rim used for strengthening or attachment.

1500 LB SO flanges are belong to high pressure flanges.Flanges have many pressures:CL150, CL300, CL600, CL900, CL1500, CL2500.Flange dimension has a very large range to meet different demands.

orged steel flange is a disc-shaped piece of equipment used to connect a pipe to fittings or valve or other component to form a pipework system. Usually flange has been attached to pipe or tube end to, and then a gasket is inserted in the middle to form a seal. Finally they are joined together with bolts and nuts.

Welding neck flange benefits

A flange can be defined as a method that helps in connecting pipes, valves, etc., to form a full piping system. There are six flange classes ranging from #150 to #2500. Governed by B 16.5 standards, the ASME B16. 5 Class 300 Flange provides a pressure capacity of 300Lb.

The ASME B16.5 Weld Neck Flange is a welding-type flange cast or forged integrally with the tapered neck. It is then buttwelded to the piping system. The ASTM A182 SS WNRF Flange is made of austenitic steel consisting of 18% chromium and 8% nickel, and it is this composition that makes the flange strong and highly resistive to corrosion. 

A flange is a category of gasket made to fix two sections of pipe together, or act as a removable plug at the end of a single pipe. All flanges are round disks with holes for bolts around the rim, but the commonalities end there. a projecting flat rim used for strengthening or attachment.

Some information abou SO Flange.

The connection method of A182 F11 socket flange is to insert the pipe into the socket of the flange, and then seal it with welding or use a sealing gasket. This connection method is relatively strong and can adapt to the thermal expansion and contraction of the pipe to a certain extent.

Threaded nipple is a short piece length of pipe or tube. Its size is specified according to the length of this section of pipe and the diameter. It can be with threaded or flat ends. And both ends can be the same or different.
There are two shape : threaded one end (TOE) and threaded both end ( TBE).

Threaded Flanges are also known as screwed flange, and it is having a thread inside the flange bore which fits on the pipe with matching male thread on the pipe.

ASTM A105 threaded fittings is commonly used carbon steel grade which is used to manufacture forge piping components such as forged fittings and flange of small diameter piping, generally for piping whose nominal diameter is NPS 2 or smaller.

ASTM A105 Forged Fittings 300# WN Flange
Size Range: 1/2″ – 48″/ DN15 – DN1200
Rressure rating: Class 150, 300, 600, 900, 1500, 2500lb

ASTM A182 F304 spectacle blind is more often used than carbon steel spectacle blind as its great anti-corrosive function.ASME B16.48 is the standard of spectacle blinds.The two components have different functions in the piping system.

What is a Blind Flange?Where are Blind Flanges Most Commonly Used?

Stainless steel lap joint flange is always used with lap joint stub end (a kind of butt welded fitting).A182 F304 forged flanges have great anti-corrosive function,flanges in this material have longer using years than other materials.

Forged Steel Flange are attached by inserting the pipe into the socket end and applying fillet weld around the top. This allows for a smooth bore and better flow of the fluid or gas inside of the pipe.

What is a Weld Neck Flange and its 2 different shapes

A105 Class 150 Carbon steel blind flange is a blind plate made of carbon steel material, which is connected to the flange in the pipeline system to prevent the passage and leakage of fluids, gases and other media.

This allows for a smooth bore and better flow of the fluid or gas inside of the pipe. The connection with the pipe is done with 1 fillet weld, at the outside of the flange. But before welding, a space must be created between flange or fitting and pipe.

The equal cross is one kind of the pipe cross,  the equal cross means all the 4 ends of the cross are in same diameter.
The reducing cross also is called unequal pipe cross , it is the pipe cross which the four branch ends are not in the same diameters.

Class 1500 SO flange Flanges have many pressures:CL300, CL600, CL900, CL1500, CL2500.Flanges have five face types:RF RTJ FF MF TG. Slip on flanges can slip on the pipes and welding with the pipes.

It is used to insert the pipe into the inner hole of flange, as the flange inner diameter is little bigger than the pipe’s outer diameter, pipe and flange could be connected by lap welding at the top and bottom of the flange. The slip-on flange is a simple and excellent alternative to a weld neck as it does not have a weld bevel, and therefore allows the pipe to be adjusted in length relative to its position of the flange.

Slip on flange, also called SO flange. It’s a kind of flange slides over the pipe with internal design is slightly larger than the pipe. Since the inner diameter of the flange is slightly larger than the outer diameter of the pipe, the SO flange can be directly connected to equipment or pipe by fillet weld at the top and bottom of the flange. It is used to insert the pipe into the inner hole of the flange.

600LB Silp On (SO) Flange can slip on the pipes and welding with the pipes.Stainless steel flange are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

Materials of WN Flanges