ASTM A182 Stainless Steel Flange WN Flange Drawing

CL 600 slip on flanges are commonly used type of flanges.ASTM A182 F316L is a popular grade for stainless steel.Stainless steel flanges are popular because of the an-ti corrosive function.Stainless steel flanges can used over 50 years.

These pipe flanges are attached by inserting the pipe into the socket end and applying fillet weld around the top. This allows for a smooth bore and better flow of the fluid or gas inside of the pipe. The connection with the pipe is done with 1 fillet weld, at the outside of the flange. But before welding, a space must be created between flange or fitting and pipe.

A234 WPB blind flange is a type of flange widely used in pipeline systems. A234 is the standard number of the American Society for Testing and Materials (ASTM), and WPB indicates that this material is a carbon steel pipeline component for medium and low temperatures.

The slip-on flange is a simple and excellent alternative to a weld neck as it does not have a weld bevel, and therefore allows the pipe to be adjusted in length relative to its position of the flange. The bore of the slip on will give ample amount of space for the matching pipe.

Blind flanges are used to seal the end of piping systems or pressure vessel openings.

Class 150 F316 slip on flange is a common pipe connection element, mainly made of stainless steel material, through slip on and pipe or other flanges are connected. slip on flange is generally composed of flange plate, bolt hole and sealing surface.

High pressure flange carbon steel material: ASTM A105 / A105N, ASTM A350 LF2/LF3, ASTM A694 F42 / 46 / 56 / 60 / 65, P235GH, P265GH, P280GH, P355GH

ASME B16. 5 is limited to flanges and flanged fittings made from cast or forged materials, and blind flanges and certain reducing flanges made from cast, forged, or plate materials. Also included in this Standard are requirements and recommendations regarding flange bolting, flange gaskets, and flange joints.

300LB SO flanges is a commonly used pressure of flanges,all flanges could be 150LB,300LB,600LB,900LB,1500LB,2500LB.Stainless steel forged flanges are always used in chemical environment because of the great anti-corrosive function.The most popular stainless steel grades are A182 F304/304L and A182 F316/316L.

150 LB blind flange is a flange similar to plug.BL flanges are used to close the pipe system.ASTM A105 forged flange is carbon steel flange in American Matel Standard.

ASTM A182 F316 is a popular grade for stainless steel in American Standard.Stainless steel fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

What is a Weld Neck Flange and its 2 different shapes

These pipe flanges are attached by inserting the pipe into the socket end and applying fillet weld around the top. This allows for a smooth bore and better flow of the fluid or gas inside of the pipe. The connection with the pipe is done with 1 fillet weld, at the outside of the flange. But before welding, a space must be created between flange or fitting and pipe.

18in CL600 WN flange is belong to large dimension flanges.ASME B16.5 is standard for forged flanges.Forged flanges have important functions in high pressure enverionments.

Equal tee is one type of pipe fittings, also called straight tee which means the branch diameter is same with the main pipe (Run pipe) diameter.

What is a Socket Weld Flange,what abut its specification and advantages

Common material grade for stainless steel flange: ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317,347,904L， 1.4404, 1.4437.

Slip-On flanges are commonly lower in price than weld-neck flange.However, customers should bear in mind that this initial cost saving may be diminished by the additional cost of the two fillet welds required for proper installation.

What is a BLIND FLANGE and what about its specification and advantages.

A WN / weld neck flange, also called a tapered hub flange or high-hub flange, is a kind of flange that can relocate stress to the pipes, ensuring a decrease in high-stress concentration at the bottom of the flange.

These Stainless Steel A182 Threaded Union are best known for their heat resistance, creep strength and tensile strength. Machined and fabricated to meet your diverse piping requirements, these pipes fittings exhibit excellent corrosion resistance in a wide range of atmospheric environments.

The spectacle blind flange is named because its shape resembles the number “8”. One end is a blind and the other end is an iron ring. However, the diameter of the throttling ring is the same as the diameter of the pipe and does not play a throttling role. This design makes the spectacle blind flange uniquely flexible and practical in the pipeline system.

Stainless steel 316L LAPJ flange has great anti-corrosive function,it always used with lap joint stub end of same material.ASME B 16.5 forged flange have soem pressures:CL150,CL300,CL600,CL900,CL1500,CL2500.You could find the comparison between LAPJ flanges,SO flanges and WN flanges below.

Forged Steel Flange are attached by inserting the pipe into the socket end and applying fillet weld around the top. This allows for a smooth bore and better flow of the fluid or gas inside of the pipe.

TOE means threaded at one end when translated. Thus, we can say that a nipple TOE is a nipple that has one threaded end.
In this case, we have the acronym TBE for “threaded both ends” which means threaded at both ends. In other words, this is the most typical type of nipple as described above for connecting two parts or fittings with female threading.

Usage of a weld neck flange

The purpose of these is to block off a section of pipe or a nozzle on a vessel that is not used. (A nozzle is typically a pipe coming out of a vessel and is usually flanged so it can be connected to valves or piping). Many times a nozzle will be blanked off with a blind flange for pressure tests in a plant, or simply because the customer does not need all the nozzles that were supplied on the tank.