ASTM A182 Stainless Steel Flange Slip On Flange Manufacturer

Material Grade: ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317,347,904L， 1.4404, 1.4437.

An assembly with limited space may be an instance in which a socket weld is selected, provided the pressure class is comparatively low and the fluid is not corrosive or for extremely high temperature service.

Flanges are usually welded or screwed. Flanged joints are made by bolting together two flanges with a gasket between them to provide a seal. Large diameter flat welding flange has less high-pressure suitability compared to its weld neck counterpart. The basic ring style is suitable for the occasion of low pressure.

WN flanges is the most popular type of flanges.ASTM A182 F304 is a American standard grade of stainless steel.The other popular grade is A182 F316.ASME B16.5 forged flanges inculding WN flange,SO flange,SW flange,THD flange,LAPJ flange,BL flange.All types of flanges have pressures:150#,300#,600#,900#,1500#,2500#.

The descipton ,specification ,and advantages of a weld neck flange.

300LB THD flanges are one types of flanges.Other types of flanges are WN,SO,SW,LAPJ,BL.ASTM A182 F316 flanges are popular in many corrosive environments because of the excllent corrosion resistance.Flanges have many pressures:CL150, CL300, CL600, CL900, CL1500, CL2500.

Equal tee is one type of pipe fittings, also called straight tee which means the branch diameter is same with the main pipe (Run pipe) diameter.

A182 F304 slip on flange include flanges, bolt holes and sealing surfaces. The flange is a flat ring structure with an outer diameter larger than the outer diameter of the pipe connected to it. The bolt holes are evenly distributed on the flange and are used to install bolts to connect two flanges.

ASTM A182 F316 Threaded Flange is a flange manufactured according to A182 standard, and its connection method is threaded connection. It is a commonly used connector in pipeline systems, used to connect pipelines, valves, pumps and other equipment, so that fluids can be smoothly transmitted within the system.

Slip on flange, also called SO flange. It’s a kind of flange slides over the pipe with internal design is slightly larger than the pipe. Since the inner diameter of the flange is slightly larger than the outer diameter of the pipe, the SO flange can be directly connected to equipment or pipe by fillet weld at the top and bottom of the flange. It is used to insert the pipe into the inner hole of the flange.

Standards and application Referred for WN flange and application

Forged Steel Flange are attached by inserting the pipe into the socket end and applying fillet weld around the top. This allows for a smooth bore and better flow of the fluid or gas inside of the pipe.

Some information abou SO Flange.

Slip ons in higher pressure classes are often made with the height of a lap joint for a better connection. If the hub height is not a concern and a lap joint is not readily available, customers will sometimes opt for a slip on made to a lap joint style with a machined hub.

Slip-On flanges are commonly lower in price than weld-neck flange.However, customers should bear in mind that this initial cost saving may be diminished by the additional cost of the two fillet welds required for proper installation.

ASTM A350 LF2 Blind Flange is a common low-temperature carbon steel material, mainly used in the manufacture of low-temperature and high-pressure forged pipe fittings and flanges.

Class 150 WN flange is the lowest pressure flange in all the flanges,langes also have many pressures:CL300, CL600, CL900, CL1500, CL2500.ASTM A105 is the matal standard for forged flanges and fittings.

A105 Class 150 Carbon steel blind flange is a blind plate made of carbon steel material, which is connected to the flange in the pipeline system to prevent the passage and leakage of fluids, gases and other media.

CL 600 slip on flanges are commonly used type of flanges.ASTM A182 F316L is a popular grade for stainless steel.Stainless steel flanges are popular because of the an-ti corrosive function.Stainless steel flanges can used over 50 years.

A105 Lap Joint flanges are made by using flanges, steel rings, etc. to put flanges on the pipe ends, and the flanges can move on the pipe ends. The function of the flange is to press them tightly. Because they are blocked by the flanges, the Lap Joint flanges do not contact the medium.

What is a Spectacle Flange and what about its specification and advantages.

A234 WPB blind flange is a type of flange widely used in pipeline systems. A234 is the standard number of the American Society for Testing and Materials (ASTM), and WPB indicates that this material is a carbon steel pipeline component for medium and low temperatures.

The bore of the slip on will give ample amount of space for the matching pipe. This allows for enough working space for the welder and fabricator to make the connection.Slip-On flanges are commonly lower in price than weld-neck flange.

Blind flanges are used to seal the end of piping systems or pressure vessel openings.

It is generally used in non-corrosive, non-critical, moderate pressure services. Slip on flanges of Class 150 and Class 300 are most commonly seen in utility engineering. Similar to welding neck flange, the slip on flange conforming to ASME B16.5 may generally be furnished with three facing types: raised face (RF), flat face/ full face (FF), or ring type joint (RTJ).

What is a Blind Flange,what about its specification and its advantages

The spectacle blind flange is named because its shape resembles the number “8”. One end is a blind and the other end is an iron ring. However, the diameter of the throttling ring is the same as the diameter of the pipe and does not play a throttling role. This design makes the spectacle blind flange uniquely flexible and practical in the pipeline system.

These pipe flanges are attached by inserting the pipe into the socket end and applying fillet weld around the top. This allows for a smooth bore and better flow of the fluid or gas inside of the pipe. The connection with the pipe is done with 1 fillet weld, at the outside of the flange. But before welding, a space must be created between flange or fitting and pipe.