Home » Forged Steel Fittings » ASTM A182 F304L Stainless Steel Socket Weld Outlet MSS SP 97

ASTM A182 F304L Stainless Steel Socket Weld Outlet MSS SP 97

What is a Socket Weld Outlet and what about its specification and advantages.

ASTM A182 F316 Pipe Nipples ASME B16.11 Forged Fittings

ASTM A182 F304 Stainless Steel Socket Weld Union MSS SP-83

Content

What is a pipe Outlet
The pipe olet is also called the pipe socket, the saddle, and the saddle pipe joint.The main body of the olet is made of high-quality forgings, and the materials are the same as the pipe materials, such as carbon steel, alloy steel and stainless steel. Both the olet and the main pipe are welded, and the connection of the olet or other pipe (such as short pipe, wire plug, etc.), instrument and valve has three types: butt welding connection, socket welding connection and screw connection. Commonly used manufacturing standards for olet stations are MSS SP-97, GB/T19326 and other standards.

Types Of pipe Outlet

Sockolets: refers to the socket welding pipe table for pipe diameter , see standard MSS-SP-97

Weldolet: refers to the butt welding pipe table for pipe diameter , see standard MSS-SP-97

Threadolet: Threaded pipe stand for pipe diameter , see standard MSS-SP-97

SPECIFICATION Of Socket Weld Outlet

Size Range	1/8“-4”/DN6-DN100
Pressure Rating	Class 3000 lbs/6000lbs
Standard	Mss sp 97
Carbon Steel	ASTM A105/A105N
Low Tem Carbon Steel	ASTM A350 LF2/LF3
Pipeline Steel	ASTM A694 F42/46/50/56/65
Alloy Steel	ASTM A182 F11/12/5/9/91/92/22
Stainless Steel Material	A182 F304/304L/304H F316/316L F317 F310S F321 F347 F904L

Advantages And Disadvantages

The olet station is widely used in foreign countries in recent years. The reinforcing pipe fittings used for olet connection replace the traditionally used reducer tee, reinforcing plate and reinforced pipe section, etc., which are safe and reliable, reduce the cost; simple construction Improve the medium flow channel; serialization standardization, convenient design and other outstanding advantages, especially in high pressure, high temperature, large diameter, thick wall pipe.

Inquiry

More Socket Weld Fittings

What is a SW 45 degree elbow fittings ,and its specification and advantage.

ASTM A105N Carbon Steel 45 Degree Socket Weld Elbow

These pipe flanges are attached by inserting the pipe into the socket end and applying fillet weld around the top. This allows for a smooth bore and better flow of the fluid or gas inside of the pipe. The connection with the pipe is done with 1 fillet weld, at the outside of the flange. But before welding, a space must be created between flange or fitting and pipe.

Socket Weld Pipe Flange, Raised Face Socket Weld Flange

Concept of SW elbow Shanghai Zhucheng Pipe Fittings Manufacturing Co., Ltd. is a production and processing enterprise that provides customers with seamless pipes, welded pipes, butt-welded pipe fi...

1/8” – 4”NPS Sw 45 90 180 degree elbow cs a105n

A182 SS304L sockolet is a pipe stainless steel pipe fitting.Stainless steel fittings are popular because of the great anti-corrosive function.Shanghai Zhucheng is an excellent high quality pipe fittings supplier in China.

A182 SS304L Sockolet High Quality Pipe Fittings

What is a Socket weld Uninon,what about its speicification and advantage

ASTM A105N Carbon Steel Socket Weld Union MSS SP-83

What is a Socket Weld Union,what about its specification and advantages.

ASTM A182 Stainless Steel Socket Weld Union MSS SP 83

Stainless steel pipe fittings including Tee,Cross, Elbow, Reducer, Coupling, Nipple, Plug & Cap,Union.They can be connected with pipes by welding, socket and thread.

Stainless Steel Pipe Fittings Pipe Fitting Supplier

There are two types of tees:Equal Tee and Reducing Tee.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

Reducing Tee Stainless Steel Pipe Fittings

Coupling is a connector used to screw two pieces of pipe together using threaded rings, It is used for fittings that connect two pipes more closely in a piping system. .Socket Weld half Coupling is a coupling with a socket weld only at one end, It is usually welded directly to the pipeline to form a branch connection.

304SS 3000# Coupling 1/2 In Socket Weld 316 SS

Socket Weld Half Couplings is utilised in various applications in order to provide a torque free sealing and a leak free connection. Socket weld coupling is a very short section of pipes with socket bore at both ends or one end, but both can afford high pressure of 3000#, 6000#, 9000#. The Socket Weld Half Coupling are often directly welded to the run pipe, to form a branch connection.

Socket Weld Couplings in Grade 304 and 316 Stainless Steel

ASME B16.11 socket weld tee is a pipe fitting mainly used in pipeline systems. It has three interfaces, one of which is a socket and the other two are spigots. It is connected to other pipes or pipe fittings by means of a socket connection. This connection method makes the installation and maintenance of the pipeline system relatively convenient.

ASME B16.11 Socket Weld Tee

Socket Weld Fittings Specification
Shape: Elbow, Tee, Cross, Coupling, Union, Cap, Reducing Insert, Sockolet
Size Range: 1/8″ – 4″ / DN6 – DN100
Pressure Rating: Class 3000lbs, 6000lbs, 9000lbs
Standard: ASME B16.11, BS3799, EN 10241, MSS SP-83, MSS SP-97

High Pressure Socket Weld Steel Pipe Fittings 3 inch Union

Class 3000 SW tee is a commonly used socket weld fitting.There are many pressures for SW fittings:3000,6000,9000.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

Class 3000 SW Tee Stainless Steel Pipe Fittings

Concept of SW elbow Elbow materials include cast iron, stainless steel, alloy steel, malleable cast iron, carbon steel, non-ferrous metals and plastics. Socket elbow is mainly a high-pressure elb...

ASME B16.11 Socket welded elbow 45/90/180 deg 9000lbs

Definition of SW TEE Socket tees are mainly formed by round steel or steel ingot die-forging blanks, and then processed by lathes to form a high-pressure tee pipe connection fittings.They are T-s...

Socket welding Tee 1/8″-4″ carbon steel ASTM A105

Socked Weld Elbow
Material: Stainless Steel
Type: 90 Degree and 45 Degree
Pressure Rating: CL3000

ISO Manufacturer Stainless Steel CL3000 Socked Weld Elbow

Concept of SW 90 degree elbow Socket 90-degree elbow, the elbow is a pipe fitting that changes the direction of the pipeline. According to the angle, there are three commonly used ones: 45° and 90...

Forging socket welding elbow 90 deg ASME B16.11

Socket Weld 90 Degree Elbow makes 90°changes of course within the run of pipe to create a channeling framework. Socket Weld 90 Elbow is planned for wide utilize totally different industries like oil refineries, chemical processing, petrochemical, and numerous other businesses.

A105 3000PSI DN25 Socket Weld Elbow

What is a Socket weld cross and what about its specificaton and advantange.

ASME B16.11 ASTM A105N Socket Weld Cross Carbon Steel Pipe Fittings

We are the ISO certified manufacturer from China. Our main products contains steel pipe, pipe fittings and flanges in carbon steel, alloy steel and stainless steel.

ISO ASME B16.11 Socked Weld Coupling

ASTM A106 lateral tee is a carbon steel pipe fitting which plays an important role in pipe systems.Class 3000 pipe fittings are very popular because the pressure can be manufacture in both THD fittings and SW fittings.

ASTM A106 Lateral Tee Class 3000 Pipe Fittings

SW tees have two types:Equal and Reducing.SW fittings have same ranges of size(1/8”-4”) and pressures(2000lb,3000lb,6000lb,9000lb).Class 3000 is the most common used among these pressures.Class 3000 can be labeled as 3M,where M means 1000,class 3000 fittings can withstand up to 3000 PSI.

Equal SW Tee Class 3000

What is a SW coupling and what about its size and specification

Carbon Steel A105N Socket Weld Coupling

Definition of SW TEE Shanghai Zhucheng Pipe Fitting Manufacturing Co., Ltd. specializes in the production and sales of socket tees in accordance with American Standard ASME B16.11. The specificat...

SW Straight Equal Tee DN6-100 sch 6000LBS

ASTM A182 F316 is a popular grade for stainless steel in American Standard.Stainless steel fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

A182 F316 Stainless Steel Fittings

What is a Socket weld Uninon,what about its speicification and advantage

ASTM A182 F304 Stainless Steel Socket Weld Union MSS SP-83

Flush Bushing: Flush bushing are used in piping systems. They are installed in the pipe to reduce the size of the pipe. Forged bushing is ideal for use with water and oil in chemical, petrochemical, pulp, paper, shipbuilding, waste incineration, and semiconductor industry applications.

Stainless Steel Pipe Fitting, Reducing Bushing, 1 1/2 in. Male NPT x 1 in. Female NPT

There are various grade for Stainless Steel Forged Pipe Fittings: ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317, 347, 904L，1.4404, 1.4437.

Stainless Steel A182 F316 Pipe Fittings Socket Weld Elbow

What is SW Coupling? The socket weld couplingis a pipe connection piece machined by round steel or steel ingot die forging. Its connection form is socket welding (Socket Welding-SW), and the stee...

Sw couplings Equal 1/8″-4″ forging fittings 3000LB

Available at90 degree and 45-degree angles, these fittings allow pipe runs to change direction. SW elbows can be either short radius or long radius designs as required.

High Pressure Forged Steel Socket Weld Elbow