ASTM A182 F304 Spectacle Blind ASME B 16.48

WN flanges is the most popular type of flanges.ASTM A182 F304 is a American standard grade of stainless steel.The other popular grade is A182 F316.ASME B16.5 forged flanges inculding WN flange,SO flange,SW flange,THD flange,LAPJ flange,BL flange.All types of flanges have pressures:150#,300#,600#,900#,1500#,2500#.

Some information abou SO Flange.

A swage nipple is something similar to that of a reducer but it is used to join the butt welded pipe with a socket welded or screwed pipe.Like the reducer,swage nipple is also available with two variations:concentric swage nipple and eccentric swage nipple.The swage nipple generally adopts the MSS SP-95 or the BS3799 Standard.

The slip-on flange is a simple and excellent alternative to a weld neck as it does not have a weld bevel, and therefore allows the pipe to be adjusted in length relative to its position of the flange. The bore of the slip on will give ample amount of space for the matching pipe.

Class 300 LAPJ flanges are used with lap joint stub end.The pressures for ASME B16.5 forged flanges including 150LB,300LB,600LB,900LB,1500LB12500LB.

The bore of the slip on will give ample amount of space for the matching pipe. This allows for enough working space for the welder and fabricator to make the connection.Slip-On flanges are commonly lower in price than weld-neck flange.However, customers should bear in mind that this initial cost saving may be diminished by the additional cost of the two fillet welds required for proper installation.

The slip-on flange is a simple and excellent alternative to a weld neck as it does not have a weld bevel, and therefore allows the pipe to be adjusted in length relative to its position of the flange. The bore of the slip on will give ample amount of space for the matching pipe.

WN flange is a commonly used type of flanges,ASMT A150 forged flange is carbon steel flange according to American Standard.Flanges have many types:WN,SO,SW,THD,LAPJ,BL.

A weld neck flange, also called a tapered hub flange or high-hub flange, is a kind of flange that can relocate stress to the pipes, ensuring a decrease in high-stress concentration at the bottom of the flange.

The specification of ASTM A182 Forged Pipe Fittings includes forged fittings, stainless steel, rolled alloy, forged alloy, pipe flanges as well as high-temperature service. Later then forgings and hot working, it would be cooled down to a certain temperature before heat treatment.
The Alloy Steel A182 Threaded Elbow material grade contains ASTM A182 F11 / 12 / 5 / 9 / 91 / 92 / 22.

Stainless steel lap joint flange is always used with lap joint stub end (a kind of butt welded fitting).A182 F304 forged flanges have great anti-corrosive function,flanges in this material have longer using years than other materials.

TOE means threaded at one end when translated. Thus, we can say that a nipple TOE is a nipple that has one threaded end.
In this case, we have the acronym TBE for “threaded both ends” which means threaded at both ends. In other words, this is the most typical type of nipple as described above for connecting two parts or fittings with female threading.

There are various material grade for ASTM A182 stainless steel flange: F304/304L/304H, 316/316L, 321, 310S, 317,347,904L， 1.4404, 1.4437.

ASTM A350 LF2 Blind Flange is a common low-temperature carbon steel material, mainly used in the manufacture of low-temperature and high-pressure forged pipe fittings and flanges.

A flange is a category of gasket made to fix two sections of pipe together, or act as a removable plug at the end of a single pipe. All flanges are round disks with holes for bolts around the rim, but the commonalities end there. a projecting flat rim used for strengthening or attachment.

Class 600 WN flange is a high pressure flange.Flanges have many pressures:CL300, CL600, CL900, CL1500, CL2500.ASME B16.5 is the American Standard for flanges.Flanges have five face types:RF RTJ FF MF TG.

Steel Flange Fittings connection with the pipe is done with 1 fillet weld, at the outside of the flange. But before welding, a space must be created between flange or fitting and pipe.

CL 600 slip on flanges are commonly used type of flanges.ASTM A182 F316L is a popular grade for stainless steel.Stainless steel flanges are popular because of the an-ti corrosive function.Stainless steel flanges can used over 50 years.

What is a Blind Flange,what about its specification and its advantages

DN150 SW flange is a 6in flange used to socketed with the pipes and then welding on pipes.CL150 forged flange is the lowest pressure flange.Flanges have many pressures:CL150, CL300, CL600, CL900, CL1500, CL2500.

Usage of a weld neck flange

Socket Weld Half Couplings is utilised in various applications in order to provide a torque free sealing and a leak free connection. Socket weld coupling is a very short section of pipes with socket bore at both ends or one end, but both can afford high pressure of 3000#, 6000#, 9000#. The Socket Weld Half Coupling are often directly welded to the run pipe, to form a branch connection.

ASTM A182 F304 600LB slip on flanges are very popular type of flanges because of the excellent functions and high pressure.ASME B16.47 Series A & B are American Standard for large dimension flanges.According to ASME B16.47 Series A& B,the smallest size of flanges is 22 in.

Weld Neck Flanges are a very common type of pipe flanges used in various industrial applications. They have a long tapered hub and are often used for high pressure applications.

The purpose of these is to block off a section of pipe or a nozzle on a vessel that is not used. (A nozzle is typically a pipe coming out of a vessel and is usually flanged so it can be connected to valves or piping). Many times a nozzle will be blanked off with a blind flange for pressure tests in a plant, or simply because the customer does not need all the nozzles that were supplied on the tank.

900LB slip on flange can slip on the pipes and welded with the pipes.Stainless steel flanges are popular because of the an-ti corrosive function.Stainless steel flange can used over 50 years.Flanges have many pressures:CL150, CL300, CL600, CL900, CL1500, CL2500.

What is a WN Flange?and what about its specification