ASME B16.9 Stainless Steel 90 Degree Butt Weld Elbow Manufacturer

Whatis the difference between concentric and eccentric reducers?

ASME B16.9 45 degree LR elbow is a pipe connector with a bending angle of 45 degrees. The long diameter means that the bending radius of the elbow is relatively large. It consists of a bending part and interfaces at both ends. The size of the interface matches the outer diameter of the connected pipe to ensure a sealed connection.

5in SW elbow is used to socketed with pipes and then welded on pipes.ASME B16.11 pipe fittings mean forged pipe fittings.Forged pipe fittings can be divided in socket weld fittings and threaded fittings.

Steel pipe bend is belong to butt welded fittings,bends have some similar usages as elbows.However,bends can be customized by clients to satisfy different demands.Schedule 80 is represents to the wall thickness of BW fittings.The most used wall thicknesses of butt welded fittings are SCH 40,SCH 80.

Carbon steel pipes have a wide using range because it has great functions and affordable price.It can be welded pipe and seamless pipe,among these,the more used type is welded pipe.Welded pipes also have different types:LSAW pipe,SSAW pipe and ERW pipe.

ASTM A234 WPB is a common grade for 90 degree long radius elbow, which is one of the highly demanded. They available in a large size and thickness range. They have a good performance and suffices most industrial pipeline needs.

A234 WPB Carbon Steel Buttweld 90 Deg Elbow’s usage

Carbon steel tee is a commonly used tpye of tees.This is butt welded (BW) carbon steel tee in the picture.it can welded with pipes to achieve permanent connection.Equal tee only can change the direction of the pipes while reducing tee can also reduce the flow of the fluids or gas.

Reducing tee is a kind of pipe fitting whose branch size is smaller than the size of pipeline parts. It is used for main pipe string accessories, solvent welding accessories, side outlet and conflicting soluble welding accessories.

BW elbows are belong to butt welded fittings,wall thickness of BW fittings decided the pressure that the fittings can resistance.Wall thickness SCH 40 is a commonly used wall thickness in butt welded fittings.

ASME B16.9 Stainless Steel Butt Weld Cross Fittings The function of a cross is similar to that of a tee by means of the exception of providing two 90 Deg outlets opposite each other.

What is a pipe bend,what about its specification and its difference between a elbow

A234 WP11 elbow is a pipe fitting used to change the direction of the pipeline. It is made of alloy steel. Its basic structure is a curved tubular part, usually with connection interfaces at both ends to connect with other pipeline components.

90 deg SR (short radius) elbow is a type of BW elbows,90 degree elbow also has LR (long radius) type.Shanghai Zhucheng has expericenced pipe fittings factory which can provide high quality pipe fittings and forged flanges.

Concentric Reducer (COC Reducer),is one type of BW reducer.The other type is Eccentric Reducer (ECC Reducer).The two types reducers can meet different demands,You could find the “Concentric VS Eccentric” below to learn the usages for these two types reducers.

Steel pipe elbow is a key parts in a piping system for to change the fluid flow direction. It is used to connect two pipes with same or different nominal diameters, and to make the pipe turn to a certain direction of 45 degree or 90 degree.

What is a Concentric Reducer,what about its specification and advantages.

It helps to change direction at 90 degree, and is commonly used to connect hoses to pumps, deck drains and valve.SR 90 degree elbow is the same as the pipe elbow mentioned above, but the diameter is shorter.

It helps to change direction at 90 degree, and is commonly used to connect hoses to pumps, deck drains and valve.SR 90 degree elbow is the same as the pipe elbow mentioned above, but the diameter is shorter. Therefore, this kind of steel elbow is often used when space is not enough.A 90 degree elbow attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. Available in many materials like silicon, rubber compounds, galvanized steel etc.

Butt welded tee can be equal type and reducing type.Both types can change the direction of the piping system in 90 deg.In addition,the reducing tees can reduce the flow of the fluids or gas.Shanghai Zhucheng is an excellent pipe fittings manufacturer from China who supply high quality fittings for years.

The two ends of concentric reducer are designed with large diameter and small diameter, and the pipe is connected through conical transition section on the same axis.

Pipe crossing is used where four pipes intersect. The cross pipe may have one inlet and three outlets, or three inlets and one outlet. The diameter of the outlet and inlet can be the same or different.

Carbon steel elbow is the most used material in elbows.Carbon steel fittings are used in many applications because of its great excellent functions.ASME B16.9 is represents the American Standard of butt fittings.The end of Butt welded fittings are connected to the pipe system by butt welding.

BW 180 deg elbow is used to change the direction of pipe system in 180 degree.There are also 90 deg elbow and 45 deg elbow to meet different demands.Carbon and alloy steel are always called “black steel” as the surfer of these steels are black.

Alloy steel butt-weld pipe caps are mainly used to close pipeline systems to ensure that the fluid in the pipeline will not leak.It is usually welded at the end of the pipeline to provide a reliable sealing effect.

Reducing tee a one of the type of tees,the other type is equal tee.these two types tees have similar functions,but the reducing tees can reduce the flow.Shanghai Zhucheng is an excellent Pipe fittings manufacturer who supplys high quality fittings for many years.

Butt Welding Fittings Specification
Shape: Elbow, Tee, Cross, Bend, Reducer, Cap, Stub End
Size Range: 1/2″ – 80″ / DN15 – 2000
Thickness Schedule: SCH 10,SCH 10S, SCH 20, SCH 40,SCH 40S, STD, XS,SCH 80, SCH 80S, SCH 100, SCH 120, SCH 160, XXS
China Standard: GB/T12459, GB/T13401, HG/T21635/21631, SH3408/3409
America Standard: ANSI / ASME B16.9 / MSS SP 43
japan Standard: JIS B2311/2312/2313
Europe Standard: EN10253

Steel pipe tee has three branches that can change fluid direction. It has T-shaped or Y-shaped, and include Equal Tee and Reducing Tee (Reducer Tee). Steel tee is widely used in pipe networks for convey liquids and gases.

What is a pipe Tee,its specification and importance.