ASME B16.9 Eccentric Reducer

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

45 ° elbow is also called “45 elbow or 45 ell”, and its bending mode can change the flow direction of fluid / gas in the pipeline by 45 °. The function of a 45 Degree Long Radius Elbow is same as 90 degrees long and short elbow, but the measurement and dimensions are different to that of a 90 degree long and the short elbow.

Stainless 316L tee is a stainless steel pipe fitting used to change the direction of the fluids or gas and branch the pipe system.Tees can be equal tees and reducing tees for different usages.Stainless steel fittings are be chosen by the long using years.Beacuse of the high corrosion resistance,stainless steel can be used over 50 years.

Pipe Elbow is installed between two long pipes for changing the direction of the flow of liquid or fluid. These are commonly available in two types; 90 degrees and 45 degrees. Its function is to change the direction of the fluid by 90 degrees, so it is also called vertical elbow.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

These types of tube fittings like male elbows and female elbows have been specifically designed for use on instrumentation, process and control systems and equipment employed in chemical, petroleum, fluid power, electronic and pulp and paper plants.

Pipe elbows have three types:THD (threaded),SW (socket weld),BW (butt welded).These elbows used different connections to connect with the pipes in piping system.Stainless steel fittings are popular because of the an-ti corrosive function.Stainless steel fittings can used over 50 years.

BW equal tees are the most used tees in the all types of tees.There are equal tee and reducing tee.Galvanized carbon steel pipe fittings have better corrosion resistance than carbon steel fittings.

Concentric Reducer (COC Reducer),is one type of BW reducer.The other type is Eccentric Reducer (ECC Reducer).The two types reducers can meet different demands,You could find the “Concentric VS Eccentric” below to learn the usages for these two types reducers.

These Stainless Steel Pipe Fittings are best known for their heat resistance, creep strength and tensile strength. Machined and fabricated to meet your diverse piping requirements, these pipes fittings exhibit excellent corrosion resistance in a wide range of atmospheric environments.

A234 WPB Carbon Steel Buttweld 90 Deg Elbow’s usage

45 deg BW elbow can change the direction of fluids or gas by 45 deg,it only has LR (long radius) type while 90 deg butt welded elbow has both LR and SR(short radius) types.Carbon steel is the most used material in pipe fittings because it has great functions to satisfy many applications.

It is used for main pipe string accessories, solvent welding accessories, side outlet and conflicting soluble welding accessories. Such fittings are important because they meet two needs, that is, to connect or separate liquid streams. They are widely used in positive and vacuum applications.

ASTM A403 WP316 reducer is a pipe connector, mainly used for connecting two pipes of different diameters, and plays a role in transition between large and small diameter pipe welding.

Stainless concentric reducer is belong to BW (butt welded) fittings.Reducer can be two types:Concentric (COC) Reducer and Eccentric (ECC) Reducer.The main difference of these two typws are the internal structure.Stainless steel pipe fittings have better functions than other material pipe fittings.

The two ends of concentric reducer are designed with large diameter and small diameter, and the pipe is connected through conical transition section on the same axis.

Long radius elbow refers to the pipe outer diameter with radius of curvature equal to 1.5 times, i.e R = 1.5D. Its function is to change the direction of the fluid by 90 degrees, so it is also called vertical elbow.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

A234 WPB BW reducer has the most wide ragnge of applications in all types of butt welded reducer, because A234 WPB is the most used grade in carbon steel.Carbon steel pipe fittings are accepted in many projects because these fittings have great functions and reasonable price.

10in equal elbow is used to transport flow in piping system.A234 WPB is the most used grade for carbon steel butt welded fittings.Elbows can be 90 degree and 45 degree.These elbows have similar functions,the only difference is the 90 degree elbow can changes the direction in 90 deg while the 45 degree elbow can changes in 45deg.

Stinless steel pipe is always used in many corrosive environments because of the excellent anti-corrosive function,so that the pipes can used for longer years than other materials’ pipes.Shanghai Zhucheng is a superior steel pipe supplier who supplys high quality pipes for years.

45 deg elbow can change the direction of fluids or gas in 45 degree.There is also has 90 deg elbow to be chosen.45 degree elbow has many diffences with 90 degree elbow.All types of elbows can be Equal Tee and Reducing Tee to satisfy different demands.

SS 304/304L elbow is stainless steel pipe fitting.304/604L is the most commonly used grade of stainless steel in American Standard.Elbows can made as 90 deg and 45 deg.Among these,90 degree elbows can be LR and SR while 45 degree elbows only have LR type.

Large diameter equal tee is belong to butt welded fittings because BW fittings size range is 1/2″-80″ while the forged fittings only have 1/8″-4″.Carbon steel fittings are used in many applications because of its great excellent functions.

45° Pipe Elbow is also known as “45 bends or 45 ells”. The 45° pipe elbow is used to connect tubes at a 45° pipe angle. As the name suggests, this is a pipe fitting device which is bent in such a way to produce 45° change in the direction of flow of the fluid/gas in the pipe.