ASME B16.9 Concentric Reducer

Tee welding joints are formed when two pieces intersect at a 90° angle. This results in the edges coming together in the center of a plate or component in a ‘T’ shape. Tee joints are considered to be a type of fillet weld, and they can also be formed when a tube or pipe is welded onto a base plate.

ASME B16.9 BW tee is a butt welded pipe fitting according to American Standard.Carbon steel fittings are used in many applications because of its great excellent functions.Pipe tees can be equal tee and reducing tee.These tees have same functions,the only difference is reducing tee can reduce the flow in piping system.

BW 90 elbow is the most used degree,there is also 45 deg elbow to choose.These elbows have similar functions,the only difference is the 90 degree elbow can changes the direction in 90 deg while the 45 degree elbow can changes in 45deg.ASME B16.9 is American Standard of butt welded fittings.

A234 WPB tee is a pipe fitting used in pipeline systems. It has three openings and can divide the fluid in one pipe to the other two pipes, or gather the fluid in two pipes into one pipe. Carbon steel tees can be divided into equal diameter tees and reducing tees.

There are two types of 90 deg elbows:LR (long radius),SR (short radius).45 deg eblows are also have wide applications,be attention,45 deg elbow only have LR type.Butt welded pipe fittings have the most large used range as it can be 1/2″ – 80″.

ASTM A182 F316 is a popular grade for stainless steel in American Standard.Stainless steel fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

Pipe crossing is used where four pipes intersect. The cross pipe may have one inlet and three outlets, or three inlets and one outlet. The diameter of the outlet and inlet can be the same or different.

90 deg 4D bend is belongs to butt welded fittings.4D means the radius of the bend is 4 times long the dimension of the pipe bend.API A53B is a great of carbon steel materical for pipes and bends in American Standard.

180 deg BW elbow can change the direction of fluids or gas in 1800 degree.Butt welded elbows can also be 90 deg and 45 deg.90 deg elbow and 45 deg elbow are more commonly used than 180 deg elbow.You could find the surmmary ” 45 degree elbow VS 90 degree elbow”.

Concentric reducers provide an in-line conical transition between pressurized pipes of different diameters. It is cone-shaped, and is used when there is a shift in diameter between pipes. 

45 degree elbow is second common use after 90 degree elbow. The function of a 45 degree elbow is the same as a 90 degree elbow, but the measurement of dimensions is different to that of the 90 degree elbow.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

The connection methods of elbow and pipe include: direct welding (the most common method), flange connection, hot melt connection, electric fusion connection, thread connection and socket connection

45 deg elbow can change the direction of fluids or gas in 45 degree.There is also has 90 deg elbow to be chosen.45 degree elbow has many diffences with 90 degree elbow.All types of elbows can be Equal Tee and Reducing Tee to satisfy different demands.

Steel pipe bend is belong to butt welded fittings,bends have some similar usages as elbows.However,bends can be customized by clients to satisfy different demands.

Steel bend is almost same as pipe elbow. It’s radius is bigger and extensive used in oil and gas, engineering and construction industry.

These types of tube fittings like male elbows and female elbows have been specifically designed for use on instrumentation, process and control systems and equipment employed in chemical, petroleum, fluid power, electronic and pulp and paper plants.

45 deg elbow is a type of elbows,there are also 90 deg elbows and 180 deg elbows.These elbows have similar functions,the main difference is the degree.Elbows can be BW,SW and THD to chosen for different applications.Shanghai Zhucheng is a quality pipe fittings supplier from China.

BW tees and reducers are the most used pipe fittings in the piping system.Tees can branch the flow in piping systems.Carbon steel pipe fittings are popular as the great functions and affordable functions.

Lap joint stub end usually used with lap joint flange.BW fittings are welding with the end of pipes.Butt welded fittings are popular because of the strong and permanent connections.

These Stainless Steel Pipe Fittings are best known for their heat resistance, creep strength and tensile strength. Machined and fabricated to meet your diverse piping requirements, these pipes fittings exhibit excellent corrosion resistance in a wide range of atmospheric environments.

According to fluid flow direction of the pipes, elbows can be divided into different degrees, such as 45 degree, 90 degree, 180 degree, which are most common elbows. Also there are 60 degree and 120 degree elbows for some special pipelines. This degree is just an representation of the angle by which the fluid flow is going to change after flowing through the said elbow.

A234 WPB elbow is the most chosen carbon steel elbow in all the types of elbows.A234 WPB is carbon steel grade for butt welded fittings;BW elbows have LR (long radius）and SR (short radius).Elbows have 90deg and 48deg to change the direction of the pipe system.

SR (short radius) elbow is only for 90 deg elbow.SCH XXS is the biggest wall thickness in butt welded fittings.The commonly used wall thicknesses:SCH 40 , SCH 80.The wall thickness more bigger,the bearded pressure of the fittings can be higher.

Carbon steel pipes have a wide using range because it has great functions and affordable price.It can be welded pipe and seamless pipe,among these,the more used type is welded pipe.Welded pipes also have different types:LSAW pipe,SSAW pipe and ERW pipe.

BW Reducing tee is one type of pipe tees,the other type is equal tee.These tees have same functions,the only difference is reducing tee can reduce the flow in piping system.Carbon steel fittings are used in many applications because of its great excellent functions.

An elbow is a pipe fitting installed between two lengths of pipe or tubing to allow a change of direction, usually a 180° or 90° angle, though 45° elbows are also made. The ends may be machined for butt welding (SW) or socketed welding(SW) etc.

45 ° elbow is also called “45 elbow or 45 ell”, and its bending mode can change the flow direction of fluid / gas in the pipeline by 45 °. The function of a 45 Degree Long Radius Elbow is same as 90 degrees long and short elbow, but the measurement and dimensions are different to that of a 90 degree long and the short elbow.

Alloy steel butt-weld pipe caps are mainly used to close pipeline systems to ensure that the fluid in the pipeline will not leak.It is usually welded at the end of the pipeline to provide a reliable sealing effect.