ASME B16.11 Stainless Steel SS 316 Coupling

 NPT A105 bushing is mainly used to connect two pipes of different diameters in the pipeline system or to correct the error in the pipeline installation. It is usually made of A105 carbon steel, has high strength and good corrosion resistance, and can withstand high working pressure.

Weldolet, an economical butt-weld branch connection, is designed to minimize stress concentrations and provide integral reinforcement. manufactured to meet your specific reinforcement requirements.

In small diameter pipes (below DN50), reducing nipples are also often used to replace reducing joints for pipe reducing. Reducing nipples also have concentric and eccentric parts

ASTM A182 F316 is a popular grade for stainless steel in American Standard.Stainless steel fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

Swage nipple is a common accessory in industrial pipeline connection. Common threaded short joints are divided into double head external thread, single head external thread, flat head external thread, and short joints connected by flanges.

Pipe Nipple is a fitting, consisting of a short piece of pipe, usually provided with a male pipe thread at each end, for connecting two other fittings.

The main purpose of using pipe caps is to waterproof the connections. They are also used to close the the ends of hydraulic or pneumatic pipes and tubes. The use of Forged End Pipe Caps is common in many industries such as oil and gas industries, chemical industries and water supply lines.

Carbon Steel A105 Threaded Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

Stainless steel pipe fittings including Tee,Cross, Elbow, Reducer, Coupling, Nipple, Plug & Cap,Union.They can be connected with pipes by welding, socket and thread.

Threaded couplings could be divide into full coupling (both ends threaded) and half coupling(one end threaded,the other end welded).Forged pipe fittings dimensions are all in small size,1/8″-4″.

Swage Nipple are similar to reducers, but they’re smaller, and they’re used to link larger screwed, or socket welded pipes to smaller screwed or socket welded pipes. They come in concentric and eccentric varieties, just like reducers. Swages come in a variety of end

B16.11 threaded fittings can be furnished in product forms of Elbow, Cross, Tee, Coupling, Half Coupling, Boss, Cap, plug and bushing.Threaded fittings are available in pressure ratings Class 2000, 3000, and 6000;

Threaded union is easy to install and disassemble so that it is popular in piping system.Threaded fitting used thread type to connect with pipes,threaded fittings have many pressures:2000,3000,6000.

What is aHex Nipple and what about its specification and advantages.

Shanghai Zhucheng is well known manufacturer of MSS SP-83 Union, consists of three parts: a nut, a female end and a male end. Our offered Threaded Pipe Union similar to a coupling, allows the convenient future disconnection of pipes for maintenance or fixture replacement. Threaded Reducing Union makes easy connection and disconnection, multiple times whenever we need.

We manufacture and export High Pressure Pipe Fittings. Threaded Coupling is usually packaged by wooden case.

Flush Bushing: Flush bushing are used in piping systems. They are installed in the pipe to reduce the size of the pipe. Hex Head Bushing: A hex bushing is a threaded fitting with a hex head used to tighten the fitting into a threaded opening.

ASTM A182 F316 threaded full couplings are pipe fittings with two threaded ends.ASME B16.11 forged fittings have THD fittings and SW fittings,THD fittings have CL2000,CL3000,CL6000 to choose;SW fittings have CL3000,CL6000,CL9000 to choose.

The basic difference between couplings and unions in use is that couplings connect pipes to pipes or pipes to bends.Unions are used to connect and disassemble part of the piping system for maintenance or replacement.

Thread Types:

NPT  PT  BSPP  BSPT  PF

ASTM A182 F316 pipe nipples have two shapes:TOE (threaded one end) and TBE (threaded both ends).The nipples in the picture are all in TOE shape.The pressures can be chosen:CL2000,CL3000,CL6000.

Threaded Pipe Fittings Specification
Shape: Elbow,Tee, Cross, Coupling, Cap, Swage Nipple, Bushing, Plug, Nipple, Union, Hex Nipple,Threadolet.
Size Range: 1/8″ –  4″ / DN6 – DN100
Pressure Range: Class 2000lbs, 3000lbs, 6000lbs
Thread Type: NPT, PT, BSPP, BSPT, PF
Standard: ASME B16.11, BS3799, EN 10241, MSS SP-83, MSS SP-97

Concentric swage nipple is mainly used for vertical pipeline. t is used to change the diameter of the pipe and connect two pipes of different sizes.

Swage nipples are often used in small diameter pipe systems, and are similar to pipes. It is used to allow plumbing to be connected to a water heater or other plumbing.

MSS SP-97 Threadolethas the outstanding advantages of safety and reliability, cost reduction, simple construction, improved medium flow channel, series standardization, and convenient design and selection