ASME B16.5 2 Inch Socket Weld Flanges Stainless Steel Flanges

Class 150 WN flange is the lowest pressure flange in all the flanges,langes also have many pressures:CL300, CL600, CL900, CL1500, CL2500.ASTM A105 is the matal standard for forged flanges and fittings.

Reducing pipe (reducing nipple) is a pipe fitting used for straight-line connection of two pipes with different sizes to realize pipe diameter reduction. There are concentric reducing joints and eccentric reducing joints

A182 F304 slip on flange include flanges, bolt holes and sealing surfaces. The flange is a flat ring structure with an outer diameter larger than the outer diameter of the pipe connected to it. The bolt holes are evenly distributed on the flange and are used to install bolts to connect two flanges.

ASME B16.5 flange is a flange made accoding to American matal standaed.Class 150 WN flange is the lowest pressure of flange.Flanges have many pressures:CL150, CL300, CL600, CL900, CL1500, CL2500.

What is a Blind Flange,what about its specification and its advantages.

Slip on flange, also called SO flange. It’s a kind of flange slides over the pipe with internal design is slightly larger than the pipe. Since the inner diameter of the flange is slightly larger than the outer diameter of the pipe, the SO flange can be directly connected to equipment or pipe by fillet weld at the top and bottom of the flange. It is used to insert the pipe into the inner hole of the flange.

900LB slip on flange can slip on the pipes and welded with the pipes.Stainless steel flanges are popular because of the an-ti corrosive function.Stainless steel flange can used over 50 years.Flanges have many pressures:CL150, CL300, CL600, CL900, CL1500, CL2500.

A flange can be defined as a method that helps in connecting pipes, valves, etc., to form a full piping system. There are six flange classes ranging from #150 to #2500. Governed by B 16.5 standards, the ASME B16. 5 Class 300 Flange provides a pressure capacity of 300Lb.

300LB SO flanges is a commonly used pressure of flanges,all flanges could be 150LB,300LB,600LB,900LB,1500LB,2500LB.Stainless steel forged flanges are always used in chemical environment because of the great anti-corrosive function.The most popular stainless steel grades are A182 F304/304L and A182 F316/316L.

18in CL600 WN flange is belong to large dimension flanges.ASME B16.5 is standard for forged flanges.Forged flanges have important functions in high pressure enverionments.

Slip on flange also named as SO flange. SO flanges slip over pipes and are designed to bit slightly bigger on the inside than the pipe. They connect to the pipe through a fillet weld at the flange top and bottom.

Forged Steel Flanges Specification
Shape: Weld Neck Flange ( WN),Slip-on Flange (SO), Threaded Flange (THD),Socket Weld Flange (SW),Blind Flange (BL),Lap Joint Flange (LAPJ),Plate flange (PL)
Size Range: 1/2″ – 48″/ DN15 – DN1200
Pressure Rating: Class 150, 300, 600, 900, 1500, 2500lb
Standard: ASME B16.5, ASME B16.47 Series A/B, EN 1092-1, API 605, MSS SP-44, DIN 2627, DIN 2527, DIN 2558, DIN 2576, DIN 2641, DIN 2655, DIN 2656, DIN2573
Carbon Steel: ASTM A105 / A105N, ASTM A350 LF2/LF3, ASTM A694 F42 / 46 / 56 / 60 / 65, P235GH, P265GH, P280GH, P355GH

Slip on flange can be made by forging, steel cutting, casting and etc. Among these manufacturing types, the forging type gains the best quality and also the most common use.

DN150 SW flange is a 6in flange used to socketed with the pipes and then welding on pipes.CL150 forged flange is the lowest pressure flange.Flanges have many pressures:CL150, CL300, CL600, CL900, CL1500, CL2500.

A182 F316‌ lap joint flange uses flanges, steel rings, etc. to put the flange on the pipe end, so that the flange can move on the pipe end. The steel ring or flange is used as a sealing surface, and the flange is used to press them tightly.

It is used to insert the pipe into the inner hole of flange, as the flange inner diameter is little bigger than the pipe’s outer diameter, pipe and flange could be connected by lap welding at the top and bottom of the flange.

What is a Socket Weld Flange,what abut its specification and advantages

Stainless steel flange, also called SS flange, it means the material of flange is stainless steel. Common material standards and Grades are ASTM A182 Grade F304/L and F316/L, with pressure ratings from Class 150, 300, 600 etc and to 2500.

ASTM A182 F304 600LB slip on flanges are very popular type of flanges because of the excellent functions and high pressure.ASME B16.47 Series A & B are American Standard for large dimension flanges.According to ASME B16.47 Series A& B,the smallest size of flanges is 22 in.

A105 FF slip on flange is a commonly used pipeline connection element, mainly made of carbon steel, and connected to pipelines or other flanges by flat welding. The structure of the slip on flange is relatively simple.

ASTM A350 LF2 is a low temperature carbon steel material, mainly used to manufacture flanges and other connectors. This material has good low temperature performance and corrosion resistance, and is suitable for use in low or ultra-low temperature environments.

Stainless steel pipe fittings including Tee,Cross, Elbow, Reducer, Coupling, Nipple, Plug & Cap,Union.They can be connected with pipes by welding, socket and thread.

Stainless steel socket flanges are installed during pipeline construction and connected to another pipeline through bolts to achieve a tight connection of the pipeline.

Welding neck flange benefits

P280GH weld neck flange refers to a flange connection method that uses P280GH material as the base material and forms one or more layers of P280GH material welding layers on the flange surface through the butt welding process to improve the flange’s high temperature resistance, high pressure resistance and corrosion resistance.

ASME B16.5 forged flanges are high pressure flansges inculding pressures 150LB,300LB,600LB,900LB,1500LB,2500LB.SS316 CL300 flanges is a kind of stainless steel CL300 flanges.Other popular grades of stainless steel are SS316L,SS304/304L.

The smooth transition between the flange and the hub combined with the strength of the butt weld joint, allows the flange to be used in extreme conditions of cyclic loading, bending and temperature fluctuations.

Socket Weld Flange contain a shoulder on the flange inside that acts as a guide to set the depth at which the pipe is welded to the flange.