A694 F52 3 inch no Pain Threaded Coupling Manufacturer

Equal tees are available in sizes from half an inch to 48 inches (or larger) and in seamless and welded execution (seamless up to 24 inches, welded for tee sizes above 24 inches).

Pipe Tee is a most frequently used pipe fitting or connector nowadays. It functions the same as olets that means it is used to take a branch connection for linear pipeline. As the name TEE represents, the shape is T-shaped with two outlets, at 90° to the connection to the main line

What is a THD Uninon,what about its speicification and advantage

Carbon steel threaded tee is a pipe connector made of carbon steel material, with three threaded interfaces, used to connect three pipes, one of which is used as a branch port. It realizes the medium diversion in the pipeline system and ensures the normal operation of the pipeline system.

ASTM A182 F316 is a popular grade for stainless steel in American Standard.Stainless steel fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

Threaded couplings used thread connection to connect two pipes.Threaded coupling is belong to forged steel fittings.The other type of forged fitting is socket weld fittings.All the forged fittings are high pressure pipe fittings.

Threaded Pipe Fittings Specification
Shape: Elbow,Tee, Cross, Coupling, Cap, Swage Nipple, Bushing, Plug, Nipple, Union, Hex Nipple,Threadolet.
Size Range: 1/8″ –  4″ / DN6 – DN100
Pressure Rating: Class 2000lbs, 3000lbs, 6000lbs
Thread Type: NPT, PT, BSPP, BSPT, PF
Standard: ASME B16.11, BS3799, EN 10241, MSS SP-83, MSS SP-97

Threaded union is easy to install and disassemble so that it is popular in piping system.Threaded fitting used thread type to connect with pipes,threaded fittings have many pressures:2000,3000,6000.

Used for all sorts of media: chemical substances, petrochemical products, liquefied gas – especially in loading/unloading applications. There are also couplings intended for highly aggressive chemical substances, lined with ECTFE – a polymer resistant to chemicals.

The specification of ASTM A182 Forged Pipe Fittings includes forged fittings, stainless steel, rolled alloy, forged alloy, pipe flanges as well as high-temperature service. Later then forgings and hot working, it would be cooled down to a certain temperature before heat treatment.
The Alloy Steel A182 Threaded Elbow material grade contains ASTM A182 F11 / 12 / 5 / 9 / 91 / 92 / 22.

Shapes:
Equal：This is a Pipe fitting with the same size on three sides.
Reducing：The main pipe of these tee is different from the diameter of the branch pipe, and the diameter of the main pipe is larger than that of the branch pipe.

Swage Nipple and short joint reducing joint are pipe fittings used for straight-line connection of two pipes with different sizes to realize pipe diameter reduction. There are concentric reducing joint and eccentric reducing joint

Concentric BW reducer is a tpye of reducers,there is also eccentric reducer to choose.BW reducers used to reduce the flow of the fluids in the piping system.Stainless steel pipe fittings are popular because the superior functions.SCH 40 and SCH 80 are the commonly used wall thicknesses in butt welded fittings.

What is aHex Nipple and what about its specification and advantages.

Carbon steel pipe fittings are used in many applications because of its great excellent functions.Carbon steel pipe fittings can manufactured as THD (threaded) fittings,SW (socket weld) fittings and (BW) butt welded fittings.The specifications are in the content below.

The specification of ASTM A182 Forged Pipe Fittings includes forged fittings, stainless steel, rolled alloy, forged alloy, pipe flanges as well as high-temperature service. Later then forgings and hot working, it would be cooled down to a certain temperature before heat treatment.

Flush Bushing: Flush bushing are used in piping systems. They are installed in the pipe to reduce the size of the pipe. Hex Head Bushing: A hex bushing is a threaded fitting with a hex head used to tighten the fitting into a threaded opening.

The basic difference between couplings and unions in use is that couplings connect pipes to pipes or pipes to bends.Unions are used to connect and disassemble part of the piping system for maintenance or replacement.

We are manufacturer of High Pressure Pipe Fittings from China. Threaded fittings are available in pressure ratings 2000LB, 3000LB, and 6000LB; Threaded Coupling Dimension is 1/8″ –  4″ / DN6 – DN100. Threaded Steel Coupling is a short piece with screw in NPT or BSP ends or one end, which is available in stainless steel, alloy steel and carbon steel.

Threaded elbow and coupling are used thread type to connect the pipes to trsnsport flow in piping system.THD fittings are belong to forged fittings,ASME B16.11 fittings are American Standard for forged fittings.

Forged threaded elbows are very common in chemical, oil refining, petrochemical and other industries, and are also used in some other industries.

Full Coupling: Both ends of the full thread coupling are threaded. Half Coupling: One end of a half thread coupling is threaded and the other end is welded.

Shanghai Zhucheng is well known manufacturer of MSS SP-83 Union, consists of three parts: a nut, a female end and a male end. Our offered Threaded Pipe Union similar to a coupling, allows the convenient future disconnection of pipes for maintenance or fixture replacement. Threaded Reducing Union makes easy connection and disconnection, multiple times whenever we need.

hat is a threaded tee,what about its specification and its difference between a elbow.

Threaded fittings are mainly used for small pipe diameters, generally for piping whose nominal diameter is NPS 2 or smaller. Threaded joints probably represent the oldest method of joining piping systems.

What is a treaded nipple,what about its specification and its difference between coupling.

BSP Pipe Fittings Specification:
Type: Elbow /Tee /Cross /Coupling /Cap/Union /Nipple /Plug /Bushing
Material: CS/LOW TEMP CS/PIPELINE STEEL/ALLOY STEEL /SS/ DUPLEX SS
Standard: ASME B16.11, BS3799
Size: 1/8IN-4IN/DN6-DN10
Rating: 2000lbs,3000lbs,6000lbs
British Standard Pipe Parallel (BSPP)

Threadolet has the same basic design as a weldolet. However the main difference is the fitting has a female threaded connection to link to the branch connection. This makes a 90° branch and comes in full size or reducing for a straight piece of pipe