A105 CARBON STEEL COUPLING 2″3000#

The main purpose of using pipe caps is to waterproof the connections. They are also used to close the the ends of hydraulic or pneumatic pipes and tubes. The use of Forged End Pipe Caps is common in many industries such as oil and gas industries, chemical industries and water supply lines.

ASME B16.11 socket weld tee is a pipe fitting mainly used in pipeline systems. It has three interfaces, one of which is a socket and the other two are spigots. It is connected to other pipes or pipe fittings by means of a socket connection. This connection method makes the installation and maintenance of the pipeline system relatively convenient.

Size Range: 1/8″ –  4″ / DN6 – DN100
Schedule Chart: STD, XS, SCH 160
Standard: MSS SP-97
Carbon Steel: ASTM A105 / A105N
Low Temp Carbon Steel: ASTM A350 LF2/LF3
Pipeline Steel: ASTM A694 F42/46/56/60/65
Alloy Steel: ASTM A182 F11 / 12 / 5 / 9 / 91 / 92 / 22
Stainless Steel: ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317, 347, 904L
Duplex Stainless Steel ASTM A182 F51, F53, F44

It is usually welded directly to the pipeline to form a branch connection. Couplings do not normally allow disconnection of shafts during operation, however there are torque-limiting couplings which can slip or disconnect when some torque limit is exceeded.

Socket weld Elbow forged fitting has varieties of features such as reliability, durability and dimensional precision.

A Socket Weld Fittings is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. Once correctly inserted, fillet type sealing welds are applied to join the pipe to the fitting.

What is a Socket weld Uninon,what about its speicification and advantage

Socket welded tee are generally suitable for pipes with a nominal diameter of NPS 2 or less.

Socket weld Elbow forged fitting has varieties of features such as reliability, durability and dimensional precision.

What is a Socket Weld 90 Degree Elbow,What about its specificaion and advantages.

Threaded fittings are available in pressure ratings Class 2000, 3000, and 6000; Socket welding fittings are available in pressure ratings Class 3000, 6000, and 9000. Generally, both fittings size range is 1/8″- 4″or DN6-DN100.

High Pressure Tube Fittings is available in Stainless Steel, Carbon Steel and Alloy Steel. Different from buttweld fittings, Socket Weld fittings are mainly used for small pipe diameters (Small Bore Piping); generally, for piping whose nominal diameter is NPS 2 or smaller.

SW tee and elbow are both socket weld fittings used in piping system.These fittings used to connect the pipes and transport flow. Shanghai Zhucheng is an excellent SW fittings supplier who supplys high quality pipe fittings and flanges for years.

Carbon steel pipe fittings are used in many applications because of its great excellent functions.Carbon steel pipe fittings can manufactured as THD (threaded) fittings,SW (socket weld) fittings and (BW) butt welded fittings.The specifications are in the content below.

Socket Weld 90 Elbow is planned for wide utilize totally different industries like oil refineries, chemical processing, petrochemical, and numerous other businesses.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

What is a SOCKET WELD-90 DEGREE ELBOW and what about its specification and advantages.

5IN socket welded coupling is a commonly used forged fitting in piping systems.ASME B16.11 pipe fittings are forged pipe fittings including SW fittings and THD fittings.Socket welded coupling can socketed with the pipes and then welded on pipes.

SW half coupling is a type of socket weld coupling,the other type is full coupling.ASTM A182 F304 forged fittings are stinless steel pipe fittings used in many corrosive environments.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

Coupling is a connector used to screw two pieces of pipe together using threaded rings, It is used for fittings that connect two pipes more closely in a piping system. .Socket Weld half Coupling is a coupling with a socket weld only at one end, It is usually welded directly to the pipeline to form a branch connection.

The socket weld elbow is resistance corrosion/pitting/oxidation/stress corrosion cracking and crevice corrosion

Socket Weld Coupling material can be divided into carbon steel, alloy steel and stainless-steel, and the pressure ratings is Class 3000, 6000, and 9000.

There are various grade for Stainless Steel Forged Pipe Fittings: ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317, 347, 904L，1.4404, 1.4437.

Flush Bushing: Flush bushing are used in piping systems. They are installed in the pipe to reduce the size of the pipe. Forged bushing is ideal for use with water and oil in chemical, petrochemical, pulp, paper, shipbuilding, waste incineration, and semiconductor industry applications.

Stainless steel pipe fittings including Tee,Cross, Elbow, Reducer, Coupling, Nipple, Plug & Cap,Union.They can be connected with pipes by welding, socket and thread.

Socket Weld half Coupling is a coupling with a socket weld only at one end, It is usually welded directly to the pipeline to form a branch connection. Coupling for joining a pipe to another of smaller diameter. Straight coupling connects two pipes end-to-end. It is used to supplement the infinite aluminum pipe.

High Pressure Pipe Fittings is available in Stainless Steel, Carbon Steel and Alloy Steel. Different from buttweld fittings, Socket Weld fittings are mainly used for small pipe diameters (Small Bore Piping); generally, for piping whose nominal diameter is NPS 2 or smaller.