90 DEG Stainless Steel Elbow Pipe Fittings Manufacturer

A234 WPB/WPC BW 90 degree elbows are carbon steel butt welded fittings.Elbows also have 45 degree.These elbows have similar functions,the only difference is the 90 degree elbow can changes the direction in 90 deg while the 45 degree elbow can changes in 45deg.

LR 90 degree steel pipe elbow are installed between different lengths pipe or tubing. It helps to change direction at 90 degree, and is commonly used to connect hoses to pumps, deck drains and valve.

Branches of tees have two types:Equal tee and Reducing tee.These two types tees have same functions,but reducing tee has one more function:it can reduce the flow of the gas or fluids.Butt welded fittings are the most used fittings in many applications because the size range of the BW fittings is big.

Elbow could be ranged from direction angle, connection types, length and radius, material types. As we know, according to fluid direction of the pipelines, elbow can be divided into different degrees, such as 45 degree, 90 degree,180 degree, which are most common degrees. Also there has 60 degree and 120 degree, for some special pipelines.

90 degree steel pipe elbow functioned to change fluid direction by 90 degree, so also named as vertical elbow. A 90 degree elbow attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. Available in many materials like silicon, rubber compounds, galvanized steel etc.

The lap joint stub end is required when attach the lap-joint flange to the piping system. The stub end and lap-joint flange assembly are used mainly in piping systems that necessitate frequent dismantling for inspection or routine maintenance.

What is a latera tee and the difference between a wye and a lateral?

Welded steel pipes are popular because of the strong and permanent connection,the ends of the pipes can welded with flanges.Slip on (SO) flange can slip on the pipe,and then welded on the pipes.

0 degree elbow, also called “90 bends or 90 elbows”, are manufactured as SR (Short Radius) elbows and LR (Long Radius) elbows.

SSAW steel pipe in the production process, we need to pay attention to a series of matters. Except for the following test items, according to the API standard and other relevant standards and the special requirements of some users, but also the need for steel, steel pipe and other tests Destructive tests, including physical and chemical properties of the raw materials into the plant sampling, visual inspection of 100% steel .

An elbow is a pipe fitting installed between two lengths of pipe or tubing to allow a change of direction, usually a 180° or 90° angle, though 45° elbows are also made. The ends may be machined for butt welding (SW) or socketed welding(SW) etc.

Carbon steel elbow dimensions are different depend on the type of the elbow.BW elbows can be 1/2″-80″;SW elbow and THD elbow can be 1/8″-4″.Elbows can be made from carbon steel,alloy steel and stainless steel.Shanghai Zhucheng is an experienced pipe fittings manufacturer for many years.

A234 WP22 elbow is a alloy steel pipe fitting used in piping systems.A234 WP22 is represents alloy steel butt welded fittings in American Standard.Elbows can manufactured as 45 and 90 deg.These elbows have similar functions,the only difference is 45 degree elbow can changes the direction of pipes in 45 degree while 90 degree elbow can changes in 90 deg.

Steel pipe tee has two types:Equal Tee and Reducing Tee.Common tees have 90 dergee between the main pipe and the branch.There also has lateral tee which has 45 degree between the main pipe and the branch.

When the direction change angle of the single section of the miter elbow is greater than 45, it should not be used in the pipeline with toxic and combustible media, or in the pipeline subject to vibration, pressure pulsation and alternating load due to temperature change

ASTM A234 specification has many grades, such as WPB, WPC, WP5, WP9 WP11, WP12, WP22, WP91 and so on.
In these standard Grade WPB is the most common material used for medium and high temperature pipelines. W means weldable, P means pressure, B is grade b, refer to the minimum yield strength.

Stinless steel pipe is always used in many corrosive environments because of the excellent anti-corrosive function,so that the pipes can used for longer years than other materials’ pipes.Shanghai Zhucheng is a superior steel pipe supplier who supplys high quality pipes for years.

Butt welded reducers can be concentric (COC) reducer and eccentric (ECC) reducer.These reducers have same functions,the only difference is the internal structure.There are the BW fittings specifications in the content below.

oncentric reducers are beneficial to use where different ratings and to wear protection is required in conveying between flanges or pipes.

Reducer can divided as concentric reducer and eccentric reducer.These reducer have same functions in pipe system,the only diffierence is the internal structure. Carbon steel fittings are used in many applications because of its great excellent functions.

Butt weld elbow can be welded with the pipes in piping systems to change the direction of the fluids or gas.A860 WPHY60 is belong to pipeline steel material.These elbows can be 90 deg and 45 deg to transport the flow in different direction.

The function of butt weld elbow is to change direction or flow in a piping system. There are the 45°, 90° and 180° .
According to the material, it can be divided into carbon steel, alloy steel and stainless-steel.
According to its radius of curvature, there are long radius  and short radius butt weld elbow.

45 deg elbow is a type of elbows,there are also 90 deg elbows and 180 deg elbows.These elbows have similar functions,the main difference is the degree.Elbows can be BW,SW and THD to chosen for different applications.Shanghai Zhucheng is a quality pipe fittings supplier from China.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

BW elbow and reducer are both commonly used pipe fittings in piping systems.A234 WPB is the most used grade for carbon steel butt welded fittings.