8IN SCH40 Stainless Steel Butt Weld Tee Pipe Fittings

45 deg elbow is a type of elbows,the other most used type is 90 degree elbow.These elbows have same functions,the only difference is the 45 degree elbow can changes the direction of pipes in 45 deg while 90 degree elbow can changes in 90 deg.

Concentric BW reducer is one type of butt welded fittings.BW reducers can be concentric (COC) reducer and eccentric (ECC) reducer.These reducers have same functions,the only difference is the internal structure.

BW elbow can welded with pipes to achieve strong and permanent connection.ASTM A234 WPB pipe fittings are the most popular carbon steel fittings.There is also has A234 WPC for carbon steel fittings.

Pipe crossing is used where four pipes intersect. The cross pipe may have one inlet and three outlets, or three inlets and one outlet. The diameter of the outlet and inlet can be the same or different.

When the direction change angle of the single section of the miter elbow is greater than 45, it should not be used in the pipeline with toxic and combustible media, or in the pipeline subject to vibration, pressure pulsation and alternating load due to temperature change

Long Radius (LR) Elbow is also called LR elbow – means the radius is 1.5 times the pipe diameter
L/R 45°Elbow: Long radius 45 degree elbow changes the direction by 45 degrees.
L/R 90°Elbow: Long radius 90 degree elbow changes the direction by 90 degrees.
L/R 180°Elbow: Long Radius 180 degree return bend allows complete reversal of flow.

What is a CONCENTRIC REDUCER and what about its specification and advantages.

Carbon steel elbow is a weldable & threaded pipe fitting that allows for change of flow direction, we manufactured them as standard of ASME B16.9 and B16.11. ASTM A234 WPB Elbow is the common used in the oil and gas industires.

These Stainless Steel Pipe Fittings are best known for their heat resistance, creep strength and tensile strength. Machined and fabricated to meet your diverse piping requirements, these pipes fittings exhibit excellent corrosion resistance in a wide range of atmospheric environments.

Welded steel pipes are popular because of the strong and permanent connection,the ends of the pipes can welded with flanges.Slip on (SO) flange can slip on the pipe,and then welded on the pipes.

What is a CAP nipple and what about its specification and advantages.

A234 WP22 elbow is a alloy steel pipe fitting used in piping systems.A234 WP22 is represents alloy steel butt welded fittings in American Standard.Elbows can manufactured as 45 and 90 deg.These elbows have similar functions,the only difference is 45 degree elbow can changes the direction of pipes in 45 degree while 90 degree elbow can changes in 90 deg.

Reducer can divided as concentric reducer and eccentric reducer.These reducer have same functions in pipe system,the only diffierence is the internal structure. Carbon steel fittings are used in many applications because of its great excellent functions.

Butt weld fittings are manufacture by seamless or welded pipe. For pipe fittings manufacturers, the forming process of welded pipe and seamless pipe is basically same. Butt welded fittings can be divided into carbon steel butt welded fittings and stainless-steel butt-welded fittings

Concentric reducers provide an in-line conical transition between pressurized pipes of different diameters. It is used to connect pipe segments or pipe segments on the same axis.

What is a 90° pipe elbow and what its application

S31803 90 degree elbow is a kind of stainless steel with two-phase structure of ferrite and austenite. It combines the high strength of ferritic stainless steel with the good toughness and corrosion resistance of austenitic stainless steel.

According to its radius of curvature, it can be divided into long radius elbow and short radius elbow. Long radius elbow means that its radius of curvature is equal to 1.5 times the outer diameter of the pipe, that is, r = 1.5D. Short radius elbow means that its radius of curvature is equal to the outer diameter of the pipe, that is, r = 1.0d.

Butt weld elbow can be welded with the pipes in piping systems to change the direction of the fluids or gas.A860 WPHY60 is belong to pipeline steel material.These elbows can be 90 deg and 45 deg to transport the flow in different direction.

What is a 90 degree elbos and its classification.

BW ELBOW are installed between different lengths pipe or tubing. Its function is to change the direction of the fluid by 90 degrees, so it is also called vertical elbow.

There are two types of 90 deg elbows:LR (long radius),SR (short radius).45 deg eblows are also have wide applications,be attention,45 deg elbow only have LR type.Butt welded pipe fittings have the most large used range as it can be 1/2″ – 80″.

45 degree elbow produces less friction, and with the lower pressure. 45 degree elbow is widely used in chemical industry, food, water supply facilities, electronic industry, chemical pipeline, horticulture, agricultural production, solar equipment pipeline, air conditioning pipeline and other fields.

The connection methods of elbow and pipe include: direct welding (the most common method), flange connection, hot melt connection, electric fusion connection, thread connection and socket connection

ASME B16.9 Stainless Steel Butt Weld Cross Fittings The function of a cross is similar to that of a tee by means of the exception of providing two 90 Deg outlets opposite each other.

90 degree elbow, also called “90 bends or 90 elbows”, are manufactured as SR (Short Radius) elbows and LR (Long Radius) elbows.

A 90 degree elbow attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. Available in many materials like silicon, rubber compounds, galvanized steel etc.