5 IN SW Elbow ASME B16.11 Pipe Fittings

Socket weld cross is a pipe fitting used to transport flow in the piping system.SW fittings are belong to forged steel pipe fittings,the other type of forged fitting is threaded fittings.Forged fittings are high pressure fittings used in many applications.

What is a SW coupling and what about its size and specification

Available at90 degree and 45-degree angles, these fittings allow pipe runs to change direction. SW elbows can be either short radius or long radius designs as required.

Socket Weld half Coupling is a coupling with a socket weld only at one end, It is usually welded directly to the pipeline to form a branch connection. Coupling for joining a pipe to another of smaller diameter. Straight coupling connects two pipes end-to-end. It is used to supplement the infinite aluminum pipe.

SW tee and elbow are both socket weld fittings used in piping system.These fittings used to connect the pipes and transport flow. Shanghai Zhucheng is an excellent SW fittings supplier who supplys high quality pipe fittings and flanges for years.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

Socket weld elbow (SW elbow) has 45 degree and 90 degree types, manufactured in forging processes and also has long radius (LR with 1.5 X OD) and short radius (SR with 1 X 0D) model, it has been a common socket weld fittings that used in the pipelines for changing the fluid directions.

These pipe flanges are attached by inserting the pipe into the socket end and applying fillet weld around the top. This allows for a smooth bore and better flow of the fluid or gas inside of the pipe. The connection with the pipe is done with 1 fillet weld, at the outside of the flange. But before welding, a space must be created between flange or fitting and pipe.

Coupling is a connector used to screw two pieces of pipe together using threaded rings, It is used for fittings that connect two pipes more closely in a piping system. .Socket Weld half Coupling is a coupling with a socket weld only at one end, It is usually welded directly to the pipeline to form a branch connection.

Socket Weld Coupling material can be divided into carbon steel, alloy steel and stainless-steel, and the pressure ratings is Class 3000, 6000, and 9000.

The branch pipe has two outlets and is perpendicular to the main pipe. It is used to change the direction of the pipe so that the pipe is 90 degrees perpendicular to the pipe.

The main purpose of using pipe caps is to waterproof the connections. They are also used to close the the ends of hydraulic or pneumatic pipes and tubes. The use of Forged End Pipe Caps is common in many industries such as oil and gas industries, chemical industries and water supply lines.

What is a Socket weld Uninon,what about its speicification and advantage

A182 F316 hex nipples are short nipples made of stainless steel and have a hexagonal structure. This type of nipples plays a key role in pipeline connections and can meet the needs of different pipeline designs. Common types of stainless steel hexagonal nipples include equal-diameter hexagonal nipples and reducing-diameter hexagonal nipples.

What is a Socket Weld Outlet and what about its specification and advantages.

ASTM A105 Swage Nipple is a type of carbon Steel Pipe Fittings and commonly used for connection two pipes with different diameters. It belongs to pipe reducers and are used in small pipe size more often.

SPECIFICATION Of Socket Weld Elbows and its advantages.

Socket weld elbow is a forged fitting belongs to SW fittings,SW fittings can be socketed with pipes and then welded with the pipes.SW fittings have serive of pressures:Class 3000,Class 6000,Class 9000.Among these,the most used pressure is Class 3000.

It is usually welded directly to the pipeline to form a branch connection. Couplings do not normally allow disconnection of shafts during operation, however there are torque-limiting couplings which can slip or disconnect when some torque limit is exceeded.

Socket welded tee are generally suitable for pipes with a nominal diameter of NPS 2 or less.

The socket weld elbow is resistance corrosion/pitting/oxidation/stress corrosion cracking and crevice corrosion

High Pressure Pipe Fittings is available in Stainless Steel, Carbon Steel and Alloy Steel. Different from buttweld fittings, Socket Weld fittings are mainly used for small pipe diameters (Small Bore Piping); generally, for piping whose nominal diameter is NPS 2 or smaller.

CL3000 carbon steel lateral tees are not a common used fittings but have an important role in pipe systems.Forged socket weld fittings are always be chosen because of the excellent leak-proof function.These lateral tees have run pipe with 45 deg from main pipe.

What is a SW 45 degree elbow fittings ,and its specification and advantage.

Socket weld 45 deg lateral tees are belong to pipe tees,but is a special type of pipe tees.These lateral tees could change the direction in 45 degree of the pipes.

Stainless steel SW elbow used socket connection with pipes and then welded on the pipes.ASTM A182 F304 is a commonly used grade for stainless steel fittings.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

An equal tee, otherwise called straight tee, means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee.
A pipe tee is defined “equal” when the bore size at the run and branch sides have the same diameter. An equal tee is, therefore, used to connect two pipes of the same nominal diameter.