4IN SCH40 Stainless Steel 90 Degree Elbow

ASME B16.9 45 degree LR elbow is a pipe connector with a bending angle of 45 degrees. The long diameter means that the bending radius of the elbow is relatively large. It consists of a bending part and interfaces at both ends. The size of the interface matches the outer diameter of the connected pipe to ensure a sealed connection.

BW (butt welded) reducer can be concentric (COC) reducer and eccentric (EEC) reducer.Among these two types,concentric reducer is more commonly used.The materical of reducer can be carbon steel,alloy steel and stainless steel.Clients can choose different material as their demands.

Long radius elbow refers to the pipe outer diameter with radius of curvature equal to 1.5 times, i.e R = 1.5D. Its function is to change the direction of the fluid by 90 degrees, so it is also called vertical elbow.

The surface quality and mechanical properties of the elbow are almost the same as the pipe’s. To facilitate welding, the long radius elbow should be made of the same kind material of the pipe to be connected.

Reducing tee is a commonly used fittings to branch the pipes and reduce the flow in the piping systems.Large dimension is for butt welded fittings.ASME B16.9 pipe fittings are BW fittings according to American Standard,the size range for the ASME B16.9 fittings is 1/2″-80″.

Carbon steel tee is the most used type in all tees because carbon steel has great functions and affordable price.Galvanized pipe fittings has better anti-corrosive function than normal carbon steel pipe fittings,galvanized fittings have similar functions as stainless steel fittings,but the price is cheaper than stainless steel fittings.

The function of an end cap is to block off the end of a line a piping system, This is achieved by placing the end cap over the open line and welding around the point.

90 deg 4D bend is belongs to butt welded fittings.4D means the radius of the bend is 4 times long the dimension of the pipe bend.API A53B is a great of carbon steel materical for pipes and bends in American Standard.

What is a steel pipe tee and what about its standard

Concentric reducer’s dimnesions and its usage and advantage

It is used for main pipe string accessories, solvent welding accessories, side outlet and conflicting soluble welding accessories. Such fittings are important because they meet two needs, that is, to connect or separate liquid streams. They are widely used in positive and vacuum applications.

45 ° elbow is also called “45 elbow or 45 ell”, and its bending mode can change the flow direction of fluid / gas in the pipeline by 45 °. The function of a 45 Degree Long Radius Elbow is same as 90 degrees long and short elbow, but the measurement and dimensions are different to that of a 90 degree long and the short elbow.

What is Galvanizing?

Galvanizing, or galvanization, is a manufacturing process where a coating of zinc is applied to steel or iron to offer protection and prevent rusting. There are several galvanizing processes available, but the most commonly offered and used method is called hot-dip galvanizing.

Concentric reducers are easy to transport mud and grinding fluid and are suitable for corrosive operations , It will change kindly between the pump and piping.

The lap joint stub end is required when attach the lap-joint flange to the piping system. The stub end and lap-joint flange assembly are used mainly in piping systems that necessitate frequent dismantling for inspection or routine maintenance.

S31803 90 degree elbow is a kind of stainless steel with two-phase structure of ferrite and austenite. It combines the high strength of ferritic stainless steel with the good toughness and corrosion resistance of austenitic stainless steel.

What is a CAP nipple and what about its specification and advantages.

BW tees and reducers are the most used pipe fittings in the piping system.Tees can branch the flow in piping systems.Carbon steel pipe fittings are popular as the great functions and affordable functions.

Carbon Steel: Q235, 20#, 35#, 45#, 20G,ASTM A234 WPB/WPC
Low Temp Carbon Steel: Q345B, 16Mn, ASTM A420 WPL6
Pipeline Steel: ASTM A860 WPHY 42 / 46 / 56 / 60 / 65
Alloy Steel: ASTM A234 WP11 / WP12 / WP 5 / WP9 / WP91 / WP92,15CrMoG, 12Cr1MoVG, 12Cr5Mo, 1Cr5Mo, Cr9Mo, 10CrMo910, 12CrMo4-5
Stainless Steel: ASTM A403 WP304/304L/304H, 316/316L, 310S, 321, 317,347,904L
Duplex Stainless Steel: ASTM A815 S32205, S31803, 32750, 32760

Alloy steel butt-weld pipe caps are mainly used to close pipeline systems to ensure that the fluid in the pipeline will not leak.It is usually welded at the end of the pipeline to provide a reliable sealing effect.

BW equal tee is always used in piping system to branch the pipes.ASME B16.9 Pipe Fittings are butt welded fittings in American Standard.Pipe tees can be equal tee and reducing tee.These tees have same functions,the only difference is reducing tee can reduce the flow in piping system.

Concentric reducer’s dimnesions and its usage and advantage

ASME B16.9 BW 90 elbow is pipe fitting manufactured according to American Standard.ASME B16.9 is American Standard of butt welded fittings.There is BW elbow in the picture,you could find the specification and dimensions below.

ASTM A403 Stainless Steel Butt Weld 45 Degree Elbow refers to the material of forged and rolled austenitic stainless fittings for pressure pipes. Common grades are WP304/L, WP316/L. They can be used into many fields as engineering industry, energy conversion plants etc. ASTM A403 WP304, WP316 Elbow are buttweld fittings made for austenitic stainless steel applications with forged material.

Carbon steel butt welded 90° elbows are belong to ASTM A234 WPB pipe fittingsBW 90 deg elbows could be made in two types:LR (Long Radius) and SR (Short Radius).The angle of pipe elbows are 45deg and 90 deg.Only 90 deg elbows have LR.

BW 90 degree elbow is the most chosen type in all types of elbows.It can be long radius (LR) or short radius (SR).ASTM A234 WPC is standard for carbon steel butt welded fittings.There is also a more commonly used standard for carbon steel butt welded fittings is ASTM A234 WPB.

BW reducer can be concentric (COC) reducer and eccentric (ECC) reducer.The main difference is the internal structure.COC and ECC types reducers could meet different demands in many applications.You could find the summary “COC VS ECC” in the content below.

SS 304/316 pipe tees are popular because these tees have excellent corrosion resistance.Tees can made for three types:BW (butt welded) tee,SW (socket weld) tee,THD (threaded) tee.Clients can choose different type of tees to satisfy different demands.ASME B 16.9 is represents butt welded fittings in American Standard.SW fittings and THD fittings are belong to forged fittings which marked as ASME B 16.11.

These Stainless Steel Pipe Fittings are best known for their heat resistance, creep strength and tensile strength. Machined and fabricated to meet your diverse piping requirements, these pipes fittings exhibit excellent corrosion resistance in a wide range of atmospheric environments.

BW elbow types have BW (butt welded),SW (socket weld),THD (threaded).The butt welded elbow is the most used type.Elbows have two shapes:Equal and Reducing.Shanghai Zhucheng is a pipe fittings manufacturer who can supply 45 deg,90 deg and 180 deg elbows.