45 Degree Elbow BW Pipe Fittings

The two ends of concentric reducer are designed with large diameter and small diameter, and the pipe is connected through conical transition section on the same axis.

ASTM A234 specification has many grades, such as WPB, WPC, WP5, WP9 WP11, WP12, WP22, WP91 and so on.
In these standard Grade WPB is the most common material used for medium and high temperature pipelines. W means weldable, P means pressure, B is grade b, refer to the minimum yield strength.

A equal tee’s usage,dimension and features.

‘The long radius elbow is the elbow which the radius of curvature of is 1.5 times the diameter of the pipe; if the radius of curvature is greater than 1.5 times, the long radius elbow will be called the bend. The short radius elbow means that the radius of curvature of the elbow equals the diameter of the pipe, or 1 time the diameter of the pipe in common words.

These Stainless Steel Pipe Fittings are best known for their heat resistance, creep strength and tensile strength. Machined and fabricated to meet your diverse piping requirements, these pipes fittings exhibit excellent corrosion resistance in a wide range of atmospheric environments.

Clean the steel pipe elbow body and wrap the polyethylene tape on it with adhesive. Usually the thickness of coating is 2mm. They are used in the underground pipeline system. Long radius elbow refers to the pipe outer diameter with radius of curvature equal to 1.5 times, i.e R = 1.5D.

90° Steel Pipe Elbow is the most commonly used elbow type in pipe system with the function to change the direction of fluid in 90 degree. It connects pipes with same or different diameter.

Steel pipe elbow is an important parts in plumbing pipeline systems and used to change the fluid directions. It ranges in different types as per body material there are stainless steel elbow, carbon steel elbow, and alloy steel;

BW carbon steel reducer is the most used type of BW reducers.Butt welded reducer can be concentric (COC) reducer and eccentric (ECC) reducer to meet different demands.SCH 160 fittings are belong to large wall thickness,these fittings can resist high pressure in piping system.

304/316L BW tees are the most used tees in stainless steel tees.304/316L are the most used grades in American Standard.Tees can be Equal Tees and Reducing Tees.You could find the summary “Equal VS Reducing Tee” in the content below.Stainless steel pipe fittings are populat because of the excellent functions of corrosion resistance.

Equal diameter tee, also known as straight tee, the branch diameter of the tee is the same as the pipe diameter of the tee. The three branches of tee have same diameters.

What is a STEEL PIPE TE and what about its specification and advantages.

Elbow is a commonly used connecting pipe fitting in plumbing installation, which is used for connecting pipe bends

45 degree elbow is second common use after 90 degree elbow. The function of a 45 degree elbow is the same as a 90 degree elbow, but the measurement of dimensions is different to that of the 90 degree elbow.

Fittings that change direction in a piping system are called elbows which available in 90 degree and 45 degree long radius elbow. Both of them has the center line at 1.5 x NPS from elbow end.

Specificationo and usage of a 90degree BW elbow.

The function of butt weld elbow is to change direction or flow in a piping system. There are the 45°, 90° and 180° .
According to the material, it can be divided into carbon steel, alloy steel and stainless-steel.
According to its radius of curvature, there are long radius  and short radius butt weld elbow.

Butt welded tee can be equal type and reducing type.Both types can change the direction of the piping system in 90 deg.In addition,the reducing tees can reduce the flow of the fluids or gas.Shanghai Zhucheng is an excellent pipe fittings manufacturer from China who supply high quality fittings for years.

What is a latera tee and the difference between a wye and a lateral?

Stainless steel pipe fittings including Tee,Cross, Elbow, Reducer, Coupling, Nipple, Plug & Cap,Union.They can be connected with pipes by welding, socket and thread.

316L 90 deg elbow is a stainless steel pipe fitting which can used in chemical environment because of its an-ti corrosive function.SCH 10S is repersents to the wall thickness in butt welded fittings. Commonly used wall thickness is SCH 40 and SCH 80.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

Difference between a pipe elbow and a pipe bend is as follows:

Steel pipe bend is a butt welded fitting to transport fluids or gas.The degree of steel bend will be customize according to the client’s demend.Pipe bend and elbow have some similarity,you could find the summary “pipe bend VS elbow” below.

90 deg 4D bend is belongs to butt welded fittings.4D means the radius of the bend is 4 times long the dimension of the pipe bend.API A53B is a great of carbon steel materical for pipes and bends in American Standard.

45 degree elbows have same functions to 90 degree elbows,the only different is 45 deg elbow changes the direction of pipes in 45 deg while the 90 deg elbow changes the direction in 90 deg.BW pipe fittings are popular as its strong and permanent connection.