45 DEG Elbow Pipe Fittings Manufacturer

Concentric reducers are easy to transport mud and grinding fluid and are suitable for corrosive operations , It will change kindly between the pump and piping.

Large Size 90 Degree Elbow have an improtant use in piping system to transport flow.Carbon steel elbow is the most used material because of the great functions and affordable price.

A403 WP304  eccentric reducer is a pipe fitting used to connect pipes of different diameters, and the central axes do not overlap, which means there is an eccentricity. The eccentric reducer has two ends, one with a larger diameter and the other with a smaller diameter.

If the radius is the same as pipe diameter (Center-to-Face dimension of 1.0 X diameter ), it called Short Radius Elbow (SR elbow) used normally for low pressure and low speed pipelines or in tight areas where clearance is the main issue. If the radius is larger than pipe diameter (Center-to-Face dimension of 1.5 X diameter) then we call it a Long Radius Elbow (LR Elbow) used for high pressure and high flow rate pipelines.

What is Galvanizing?

Galvanizing, or galvanization, is a manufacturing process where a coating of zinc is applied to steel or iron to offer protection and prevent rusting. There are several galvanizing processes available, but the most commonly offered and used method is called hot-dip galvanizing.

Butt welded elbow,also called BW elbow,there are two types elbows:Reducing Elbow and Equal Elbow.both types elbows can change the fluids or gas in 45 deg or 90 deg,while reducing elbows also can reduce the flow in the piping system.Shanghai Zhucheng has experienced steel pipe fittings factory to supply high quality fittings.

LR 90 degree steel pipe elbow are installed between different lengths pipe or tubing. It helps to change direction at 90 degree, and is commonly used to connect hoses to pumps, deck drains and valve.

Butt weld elbow is the most used type of elbows.It can welded with the pipes to achieve strong and permanent connection.Stainless steel fittings are popular because of the an-ti corrosive function.Stainless steel fittings can used over 50 years.

Butt Weld Fittings include elbows, tees, cross, caps and reduces. These fittings are the most common type of welded pipe fitting and are specified by nominal pipe size and pipe schedule. Buttweld fittings are manufacture by seamless or welded pipe and are formed to get the shape of elbows, tees and cross etc.

The function of a 45 Degree Long Radius Elbow is same as 90 degrees long and short elbow, but the measurement and dimensions are different to that of a 90 degree long and the short elbow.

ASTM A234 WPB Butt Welded Fittings are the best selling products in Shanghai Zhucheng Pipe Fittings Manufacturing Co Ltd from China.We can also supply customers forged pipe fittings,pipes and some related products.

Butt weld elbow is a steel elbow formed by hot pressing or forging. Its connection form is to directly weld the elbow and steel pipe. Butt welded elbows are mainly used for elbow with higher pressure and temperature than other connection types. According to the valve body material, it has stainless steel, carbon steel and alloy steel elbow

Carbon steel elbow has two degrees:90 deg and 45 deg.In real application,90 deg is more used type.90 deg elbow can be long radius (LR) and short radius (SR) while 45 deg elbow only has long radius (LR).

Steel pipe tee has two types:Equal Tee and Reducing Tee.Common tees have 90 dergee between the main pipe and the branch.There also has lateral tee which has 45 degree between the main pipe and the branch.

90 deg 4D bend is belongs to butt welded fittings.4D means the radius of the bend is 4 times long the dimension of the pipe bend.API A53B is a great of carbon steel materical for pipes and bends in American Standard.

Pipe Elbow is installed between two long pipes for changing the direction of the flow of liquid or fluid. These are commonly available in two types; 90 degrees and 45 degrees. Its function is to change the direction of the fluid by 90 degrees, so it is also called vertical elbow.

BW cap is used to close the pipe system,the function is similar to plug.A234 WPB is a commonly used grade for carbon steel in American Standard.SCH 40S is represents a wall thickness of butt welded fittings.The commonly used wall thicknesses for BW fittings are SCH 40,SCH 80.

When short radius elbows are used, the maximum working pressure should not exceed 0.8 times of long radius elbows of the same specification Miter elbows are usually used for large-size pipes with moderate conditions in low pressure (design pressure s2.0mpa), water and similar fluid media

Butt Welding Fittings Specification
Shape: Elbow, Tee, Cross, Bend, Reducer, Cap, Stub End
Size Range: 1/2″ – 80″ / DN15 – 2000
Thickness Schedule: SCH 10,SCH 10S, SCH 20, SCH 40,SCH 40S, STD, XS,SCH 80, SCH 80S, SCH 100, SCH 120, SCH 160, XXS
China Standard: GB/T12459, GB/T13401, HG/T21635/21631, SH3408/3409
America Standard: ANSI / ASME B16.9 / MSS SP 43
japan Standard: JIS B2311/2312/2313
Europe Standard: EN10253

The two ends of concentric reducer are designed with large diameter and small diameter, and the pipe is connected through conical transition section on the same axis.

Carbon Steel: Q235, 20#, 35#, 45#, 20G,ASTM A234 WPB/WPC
Low Temp Carbon Steel: Q345B, 16Mn, ASTM A420 WPL6
Pipeline Steel: ASTM A860 WPHY 42 / 46 / 56 / 60 / 65
Alloy Steel: ASTM A234 WP11 / WP12 / WP 5 / WP9 / WP91 / WP92,15CrMoG, 12Cr1MoVG, 12Cr5Mo, 1Cr5Mo, Cr9Mo, 10CrMo910, 12CrMo4-5
Stainless Steel: ASTM A403 WP304/304L/304H, 316/316L, 310S, 321, 317,347,904L
Duplex Stainless Steel: ASTM A815 S32205, S31803, 32750, 32760

Pipe crossing is used where four pipes intersect. The cross pipe may have one inlet and three outlets, or three inlets and one outlet. The diameter of the outlet and inlet can be the same or different.

90° Steel Pipe Elbow is the most commonly used elbow type in pipe system with the function to change the direction of fluid in 90 degree. It connects pipes with same or different diameter.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

ASTM A234 WPB Eccentric Reducers are pipe fittings used to connect two pipes of different diameters, with the centerline of one pipe being offset from the other.

Butt welded cap is a pipe fitting used to closed the piping systems.BW caps use welding connection to connect with the pipes.SCH 80 is a commonly used wall thickness of BW fittings,the other commonly used wall thickness is SCH 40.