4 IN BW Elbow Carbon And Alloy Steel Pipe Fittings

According to the production process, it can be divided into: welding elbow, stamping elbow, pushing elbow, casting elbow, butt welding elbow, etc. Other names: 90 degree elbow, right angle bend, etc.

A concentric reducer is used to join pipe sections or tube sections on the same axis. The concentric reducer is cone-shaped, and is used when there is a shift in diameter between pipes. For example, when a 1″ pipe transitions into a 3/4″ pipe and the top or bottom of the pipe doesn’t need to remain level.

Steel pipe bend is belong to butt welded fittings,bends have some similar usages as elbows.However,bends can be customized by clients to satisfy different demands.

The two ends of concentric reducer are designed with large diameter and small diameter, and the pipe is connected through conical transition section on the same axis.

It can have concentric reducer and eccentric reducer. It is widely used in pipeline installation projects, such as when the diameter of the pipeline needs to be changed at the inlet and outlet of the pump

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

5in SW elbow is used to socketed with pipes and then welded on pipes.ASME B16.11 pipe fittings mean forged pipe fittings.Forged pipe fittings can be divided in socket weld fittings and threaded fittings.

DN900 LR elbow is large dimension fitting,for the large dimension,the elbows always be butt welded.Wall thickness STD is a commonly used thickness of BW fittings,the other commonly used wall thickness are SCH 40, SCH 80.

Steel bend is almost same as pipe elbow. It’s radius is bigger and extensive used in oil and gas, engineering and construction industry.

BW elbow can welded with pipes to achieve strong and permanent connection.ASTM A234 WPB pipe fittings are the most popular carbon steel fittings.There is also has A234 WPC for carbon steel fittings.

90 deg elbow is the most used degree in elbows,.Butt welded fittings including BW elbows which used welded connection to connect with pipes.There is also 45 degree elbows.These elbows have similar functions,the only difference is the 90 degree elbow can changes the direction in 90 deg while the 45 degree elbow can changes in 45deg.

An equal tee, otherwise called straight tee, means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee.
A pipe tee is defined “equal” when the bore size at the run and branch sides have the same diameter. An equal tee is, therefore, used to connect two pipes of the same nominal diameter.

Reducing tee is a kind of pipe fitting whose branch size is smaller than the size of pipeline parts. It is used for main pipe string accessories, solvent welding accessories, side outlet and conflicting soluble welding accessories.

Stainless reducer is a butt welded pipe fitting used to reduce the flow in the pipe systems.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

1/2 in bend is small diameter fitting in pipe fittings.The degree of bends can be customized by clients.Carbon steel pipe fitting can be used to satisfy many applications because of the great functions and affordable price.

Steel Reducing Tee: The branch diameter is smaller than the main line diameter. Tee reducer is usually described as NPS diameters in 4”x 4”x 3”, 4”is the main line pipe diameter, and 3”is the reducing branch

The two ends of concentric reducer are designed with large diameter and small diameter, and the pipe is connected through conical transition section on the same axis.

A 90 degree elbow attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. Elbow connectors can link pipes to avoid water leakage and air leakage between pipes.

Take carbon steel buttweld fittings into a bath of molten zinc. That would get more zinc and make the price is high. We surfaced carbon steel forged fittings with electrogalvanizing because it is pretty and low cost.

A234 WPB Carbon Steel Buttweld 90 Deg Elbow’s usage

90° Steel Pipe Elbow is the most commonly used elbow type in pipe system with the function to change the direction of fluid in 90 degree. It connects pipes with same or different diameter.

BW elbow and reducer are both commonly used pipe fittings in piping systems.A234 WPB is the most used grade for carbon steel butt welded fittings.

DN1200 BW elbow is belong to large dimension fittings,these fittings always be butt welded fittings because of the large size.Butt welded fittings used welded type to connect with the pipes to achieve strong and permanent connection.

Steel pipe elbow is an important parts in plumbing pipeline systems and used to change the fluid directions. It ranges in different types as per body material there are stainless steel elbow, carbon steel elbow, and alloy steel;

Bending radius less than or equal to 1.5 times of pipe diameter belongs to elbow, and bending radius greater than 1.5 times of pipe diameter belongs to elbow

Butt Weld Fittings include elbows, tees, cross, caps and reduces. These fittings are the most common type of welded pipe fitting and are specified by nominal pipe size and pipe schedule. Buttweld fittings are manufacture by seamless or welded pipe and are formed to get the shape of elbows, tees and cross etc.

ASTM A182 F316 is a popular grade for stainless steel in American Standard.Stainless steel fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

ASME B 16.9 tee is BW (butt welded) tee belong to butt welded fittings.These tees can bu equal type or reducing type.Normal tees can change the direction of the pipe system of 90 deg.And tees also have lateral tees to change the direction of 45 deg.