304L Stainless Steel China famous manufacturer

An assembly with limited space may be an instance in which a socket weld is selected, provided the pressure class is comparatively low and the fluid is not corrosive or for extremely high temperature service.

300LB THD flanges are one types of flanges.Other types of flanges are WN,SO,SW,LAPJ,BL.ASTM A182 F316 flanges are popular in many corrosive environments because of the excllent corrosion resistance.Flanges have many pressures:CL150, CL300, CL600, CL900, CL1500, CL2500.

A182 F316‌ lap joint flange uses flanges, steel rings, etc. to put the flange on the pipe end, so that the flange can move on the pipe end. The steel ring or flange is used as a sealing surface, and the flange is used to press them tightly.

What is a Blind Flange?Where are Blind Flanges Most Commonly Used?

The common material grade of stainless steel ASTM A182 contains F304/304L/304H, 316/316L, 321, 310S, 317,347,904L， 1.4404, 1.4437.

Classification of weld neck flange

Stainless steel slip on flanges are popular type of flanges because of the great material and flexible applications.Pressures of flanges:CL150,CL300,CL600,CL900,CL1500,CL2500.ASTM A182 F316L and ASTM A182 F304 are both popular grades of stainless steel.

orged steel flange is a disc-shaped piece of equipment used to connect a pipe to fittings or valve or other component to form a pipework system. Usually flange has been attached to pipe or tube end to, and then a gasket is inserted in the middle to form a seal. Finally they are joined together with bolts and nuts.

These pipe flanges are attached by inserting the pipe into the socket end and applying fillet weld around the top. This allows for a smooth bore and better flow of the fluid or gas inside of the pipe. The connection with the pipe is done with 1 fillet weld, at the outside of the flange. But before welding, a space must be created between flange or fitting and pipe.

These Stainless Steel A182 Threaded Union are best known for their heat resistance, creep strength and tensile strength. Machined and fabricated to meet your diverse piping requirements, these pipes fittings exhibit excellent corrosion resistance in a wide range of atmospheric environments.

A flange can be defined as a method that helps in connecting pipes, valves, etc., to form a full piping system. There are six flange classes ranging from #150 to #2500. Governed by B 16.5 standards, the ASME B16. 5 Class 300 Flange provides a pressure capacity of 300Lb.

Slip on flange, also called SO flange. It’s a kind of flange slides over the pipe with internal design is slightly larger than the pipe. Since the inner diameter of the flange is slightly larger than the outer diameter of the pipe, the SO flange can be directly connected to equipment or pipe by fillet weld at the top and bottom of the flange. It is used to insert the pipe into the inner hole of the flange.

ASME B16. 5 is limited to flanges and flanged fittings made from cast or forged materials, and blind flanges and certain reducing flanges made from cast, forged, or plate materials. Also included in this Standard are requirements and recommendations regarding flange bolting, flange gaskets, and flange joints.

ASTM A182 F304 600LB slip on flanges are very popular type of flanges because of the excellent functions and high pressure.ASME B16.47 Series A & B are American Standard for large dimension flanges.According to ASME B16.47 Series A& B,the smallest size of flanges is 22 in.

TOE means threaded at one end when translated. Thus, we can say that a nipple TOE is a nipple that has one threaded end.
In this case, we have the acronym TBE for “threaded both ends” which means threaded at both ends. In other words, this is the most typical type of nipple as described above for connecting two parts or fittings with female threading.

ASTM A105 Forged Fittings 300# WN Flange
Size Range: 1/2″ – 48″/ DN15 – DN1200
Rressure rating: Class 150, 300, 600, 900, 1500, 2500lb

Usage of a weld neck flange

What is a weld neck flange and what about its dimensions?

The bore of the slip on will give ample amount of space for the matching pipe. This allows for enough working space for the welder and fabricator to make the connection.Slip-On flanges are commonly lower in price than weld-neck flange.However, customers should bear in mind that this initial cost saving may be diminished by the additional cost of the two fillet welds required for proper installation.

150LB slip on flange is the lowest pressure flange in all pressure flanges.ASME B16.5 forged flange is manufacted according to American Standard.Pressures for flanges have 150LB,300LB,600LB,900LB,1500LB,2500LB.

Equal tee is one type of pipe fittings, also called straight tee which means the branch diameter is same with the main pipe (Run pipe) diameter.

It is generally used in non-corrosive, non-critical, moderate pressure services. Slip on flanges of Class 150 and Class 300 are most commonly seen in utility engineering. Similar to welding neck flange, the slip on flange conforming to ASME B16.5 may generally be furnished with three facing types: raised face (RF), flat face/ full face (FF), or ring type joint (RTJ).

A weld neck flange is a type of flange that connects, seals, and changes the direction of a pipe in a pipe system by butt-welding the flange to the pipe. The neck of the weld neck  flange matches the outer diameter of the pipe, providing a good welding interface during welding to ensure the strength and tightness of the connection.

300LB Stainless Steel Flange is always be chosen because of the excellent anti-corrosive function,SS316 is one of commonly used grade for stainless steel.Flanges have many pressures:CL150, CL300, CL600, CL900, CL1500, CL2500.

Flanges are usually welded or screwed. Flanged joints are made by bolting together two flanges with a gasket between them to provide a seal. Large diameter flat welding flange has less high-pressure suitability compared to its weld neck counterpart. The basic ring style is suitable for the occasion of low pressure.

flange type: Weld Neck Flange ( WN),Slip-on Flange (SO), Threaded Flange (THD),Socket Weld Flange (SW),Blind Flange (BL),Lap Joint Flange (LAPJ),Plate flange (PL)

Some information abou SO Flange.