180 DEG BW Elbow 45 degree elbow VS 90 degree elbow

What is a 90° pipe elbow and what its application

Carbon steel elbow dimensions are different depend on the type of the elbow.BW elbows can be 1/2″-80″;SW elbow and THD elbow can be 1/8″-4″.Elbows can be made from carbon steel,alloy steel and stainless steel.Shanghai Zhucheng is an experienced pipe fittings manufacturer for many years.

ASME B 16.9 tee is BW (butt welded) tee belong to butt welded fittings.These tees can bu equal type or reducing type.Normal tees can change the direction of the pipe system of 90 deg.And tees also have lateral tees to change the direction of 45 deg.

A234 WPB/WPC BW concentric reducers are carbon steel butt welded fittings,among these,A234 WPB is more chosen in many industries.BW reducers can be concentric (COC) reducer and eccentric (ECC) reducer.These reducers have same functions,the only difference is the internal structure.

90 deg elbow is the most chosen degree in elbows.There are also 45 deg and 180 deg elbows.Elbows can be Equal Elbow and Reducing Elbow to satisfy different demands.ASTM A234 WPB is a material grade in American Standard repersents carbon steel butt welded fittings.

Carbon steel butt weld reducer is belong to ASME B16.9 pipe fittings,there are concentric reducer and eccentric reducer for chosen to meet different demands.

The length dimension of the reducer is almost equal to the average of the big bore and smaller bore pipe diameters. Concentric reducers are easy to transport mud and grinding fluid and are suitable for corrosive operations

45 degree elbow is second common use after 90 degree elbow. The function of a 45 degree elbow is the same as a 90 degree elbow, but the measurement of dimensions is different to that of the 90 degree elbow.

Lateral tee is a special type of BW tees,it can branch the fluids or gas in 45 deg.Galvanized steel pipe fittings has better anti-corrosive function than normal carbon steel fittings.Galvanized Steel Pipe Fittings have similar corrosion resistance as stainless steel fittings,but more cheaper than stainless steel pipe fittings.

Pipe crossing is used where four pipes intersect. The cross pipe may have one inlet and three outlets, or three inlets and one outlet. The diameter of the outlet and inlet can be the same or different.

90 deg long radius elbow is a commonly used type in elbows.There are aslo 90 degree short radius elbow and 45 degree elbow.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

45 degree BW tee’s specification and advantages in pipe system.

Concentric reducer in a pipe system, its making process and its difference between a eccentric reducer.

SS 316L elbow has better corrosion resistance than other material elbows.Butt welded fittings will use welded connection to connect with pipes,so these fittings have great anti leakage function.SS316L elbows always be chosen because of its excellent functions so that it can be used in many years.

Concentric reducers are easy to transport mud and grinding fluid and are suitable for corrosive operations , It will change kindly between the pump and piping.

Steel pipe elbow is a key part in a pressure piping system used to change the fluid flow direction. It is used to connect two pipes with same or different nominal diameters, and to make the pipe and thus the fluid direction turn to a certain direction of 45 degree or 90 degree. This change in fluid flow direction adds pressure losses to the system due to impact, friction and re-acceleration.

45 ° elbow is also called “45 elbow or 45 ell”, and its bending mode can change the flow direction of fluid / gas in the pipeline by 45 °. The function of a 45 Degree Long Radius Elbow is same as 90 degrees long and short elbow, but the measurement and dimensions are different to that of a 90 degree long and the short elbow.

BW 3D elbow is belong to Butt welded (BW) elbows.3D means the radius is 3 times of dimensions long.A234 WPB is the most used grade of carbon steel butt welded (BW) fittings according to American Standrad.The degree of the butt welded 3D elbow can be 45 deg, 90 deg and 180 deg.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

The two ends of concentric reducer are designed with large diameter and small diameter, and the pipe is connected through conical transition section on the same axis.

These types of tube fittings like male elbows and female elbows have been specifically designed for use on instrumentation, process and control systems and equipment employed in chemical, petroleum, fluid power, electronic and pulp and paper plants.

A234 WPB BW tee is a commonly used pipe fitting to transport flow in piping system.There are two tpyes of tees:Equal Tee and Reducing Tee.SCH 80 is a commonly used wall thickness for butt welded fittings,the other commonly used wall thickness is SCH 40.

Specificationo and usage of a 90degree BW elbow.