12 IN Carbon Steel Elbow ASTM A234 WPB

Pipe tees can be equal tee and reducing tee.These tees have same functions,the only difference is the reducing tee can reduce the flow in the piping system.Stainless steel fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

Butt Weld Fittings include elbows, tees, cross, caps and reduces. These fittings are the most common type of welded pipe fitting and are specified by nominal pipe size and pipe schedule. Buttweld fittings are manufacture by seamless or welded pipe and are formed to get the shape of elbows, tees and cross etc.

BW elbows have the most wide used range in all types of elbows.Shanghai Zhucheng is an excellent supplier for pipe fittings,all the fittings made from carbon steel and alloy steel will have anti-rust paint,and stainless steel fittings will have anti-rust oil to protect the fittings in the sea transportation.

Butt weld elbow is a steel elbow formed by hot pressing or forging. Its connection form is to directly weld the elbow and steel pipe. Butt welded elbows are mainly used for elbow with higher pressure and temperature than other connection types. According to the valve body material, it has stainless steel, carbon steel and alloy steel elbow

Steel pipe elbow is a key parts in a piping system for to change the fluid flow direction. It is used to connect two pipes with same or different nominal diameters, and to make the pipe turn to a certain direction of 45 degree or 90 degree.

BW elbow is the most used elbows in all the type of elbows.There are types of elbows:BW (butt welded),SW (socket welded) and THD (threaded).Alloy steel pipe fittings are popular because the material is similar to carbon steel and its material can satisfy different demands.

45 degree BW tee’s specification and advantages in pipe system.

The reducing tee has two outlets cut at 90 degrees with the main pipe, and the size of the branch pipe is smaller than the port of the pipeline. It is used for main pipe string accessories, solvent welding accessories, side outlet and conflicting soluble welding accessories

BW reducers can be concentric (COC) reducer and eccentric (ECC) reducer.These reducers have same functions,the only difference is the internal structure.Stainless pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

Classify of elbows and how to sperate it into SR and LR Elbows

What is a pipe Tee,its specification and importance.

BW reducers can be concentric (COC) reducer and eccentric (ECC) reducer.These reducers have same functions,the only difference is the internal structure.There are the applications for eccentric reducer.

ASME B16.9 tee is a butt welded tee .ASME B16.9 is American Standard for BW fittings.Carbon steel fittings are always been chosen because of the great functions and affordable price.

SS 316L elbow has better corrosion resistance than other material elbows.Butt welded fittings will use welded connection to connect with pipes,so these fittings have great anti leakage function.SS316L elbows always be chosen because of its excellent functions so that it can be used in many years.

Pipe tees have two types: Equal Tee and Reducing Tee.These tees have similar functions but reducing tee have one more function,reducing tees can reduce the flow in the pipe system.Shanghai Zhucheng is an excellent pipe fittings manufacturer who supplys high quality fittings and flanges for years.

It can be axially shifted and externally reconfigured to offer more efficient reducer connection. Concentric reducers facilitate the delivery of mud and abrasive fluids and are suitable for corrosive operations and where different ratings and wear protection are required between flanges.

Steel pipe elbows have seamless and welded version, normally in 90 degree, 45 degree & 180 degree. Material are carbon steel, alloy steel & stainless steel. BW 90 degree elbow is formed by hot forming and connects steel pipes or other pipe fittings through butt welding process

Buttwelding Fittings Specification
Shape: Elbow, Tee, Cross, Bend, Reducer, Cap, Stub End
Size Range: 1/2″ – 80″ / DN15 – 2000
Thickness Schedule: SCH 10,SCH 10S, SCH 20, SCH 40,SCH 40S, STD, XS,SCH 80, SCH 80S, SCH 100, SCH 120, SCH 160, XXS

This kind of elbow is classified by angle, and 45 degree elbow and 180 elbow is also very popular. And steel pipe elbow is also available in 60 degree, 30 degree and other special angle according to practical needs.

Butt weld elbow is a steel elbow formed by hot pressing or forging. Its connection form is to directly weld the elbow and steel pipe. Butt welded elbows have beveled ends to allow for ease of welding. This bevel allows for full penetration weld in most of the cases. Butt welded elbows are mainly used for elbow with higher pressure and temperature.

Welded steel pipes are popular because of the strong and permanent connection,the ends of the pipes can welded with flanges.Slip on (SO) flange can slip on the pipe,and then welded on the pipes.

What is a straight and reducing tee and Dimensions and Standards

Carbon Steel: Q235, 20#, 35#, 45#, 20G,ASTM A234 WPB/WPC
Low Temp Carbon Steel: Q345B, 16Mn, ASTM A420 WPL6
Pipeline Steel: ASTM A860 WPHY 42 / 46 / 56 / 60 / 65
Alloy Steel: ASTM A234 WP11 / WP12 / WP 5 / WP9 / WP91 / WP92,15CrMoG, 12Cr1MoVG, 12Cr5Mo, 1Cr5Mo, Cr9Mo, 10CrMo910, 12CrMo4-5
Stainless Steel: ASTM A403 WP304/304L/304H, 316/316L, 310S, 321, 317,347,904L
Duplex Stainless Steel: ASTM A815 S32205, S31803, 32750, 32760

LR 90 degree steel pipe elbow are installed between different lengths pipe or tubing. It helps to change direction at 90 degree, and is commonly used to connect hoses to pumps, deck drains and valve.

S31254 Elbow is a pipe fitting used in pipeline systems, and its main function is to change the flow direction of the fluid in the pipeline. Common bending angles are 45°, 90° and 180°, etc.

45in BW reducer is belong to large dimension butt welded fittings,STD is a commonly used wall thickness for BW fittings.Other commonly used wall thicknesses for BW fittings are SCH 40,SCH 80.

Lap joint stub end is belong to butt welded fittings,lap joint stub end is not usually used in many time.Lap joint stub end always be used with lap joint flange.Stainless steel pipe fittings are popular because stainless steel’s excellent performance in corrosion resistance.

Butt Welding Fittings Specification
Shape: Elbow, Tee, Cross, Bend, Reducer, Cap, Stub End
Size Range: 1/2″ – 80″ / DN15 – 2000
Thickness Schedule: SCH 10,SCH 10S, SCH 20, SCH 40,SCH 40S, STD, XS,SCH 80, SCH 80S, SCH 100, SCH 120, SCH 160, XXS
China Standard: GB/T12459, GB/T13401, HG/T21635/21631, SH3408/3409
America Standard: ANSI / ASME B16.9 / MSS SP 43
japan Standard: JIS B2311/2312/2313
Europe Standard: EN10253